Mopar 82215634AE Steel Rear Bumper for 20-26 Jeep Gladiator JT

I installed this bumper on a 2023 Jeep Gladiator Mohave. It DOES retain the factory Mohave tow hooks. You will need to install two M10 hex rev nuts on the bottom of the factory tow bar for ultimate strength. You will also need two M10 bolts, for this location I ordered the Mopar bolts. The installation from plastic bumper to the new steel bumper is very easy, I'm 67 and overweight, completed it in an hour ish by myself. I used a couple 5 gallon buckets to hold everything up. New backup lights and harness are included and the factory plugs matched. New christmas tree retainers are also on the new harness so cut off the old is fine. Please note if you are also installing the bed protection side pieces, there are two additional M10 bolts on each corner, the corners are threaded for these parts. The most difficult part of the installation was getting the factory back up light harness unplugged. I pulled the lock and it was still difficult to get this connection to release. BTW, the bumper ships loose in a cardboard box, mine arrived with a scuff on the passenger side corner. The box looked to be in great shape. I'm very happy with Quadratec and recommend you purchase from them and add the $10 for shipping protection.