Home » Jeep Bumpers, Towing, Racks » Front Bumpers » Front Full Width Bumpers » Poison Spyder 17-64-020DBTP1 Full Width Front Brawler Bumper with Shackle Tabs, Tube Gussetts & Brawler Bar in SpyderShell™ Armor Coat for 07-18 Jeep Wrangler JK

Poison Spyder 17-64-020DBTP1 Full Width Front Brawler Bumper with Shackle Tabs, Tube Gussetts & Brawler Bar in SpyderShell™ Armor Coat for 07-18 Jeep Wrangler JK

Catalog #: 12252.0202
Description
The Brawler front bumper for JK is a "full-width", high clearance bumper designed to combine hard core off-road performance with full features. This bumper is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The ends of the bumper extend far enough to protect the lower corner of the JK grille, but not far enough to hinder tire clearance or tire access to vertical obstacles. The Brawler can be mounted without cutting or altering the Jeep's frame rails. The faceted design of the Brawler provides the best ground clearance and approach angle possible in a bumper that doesn't require frame modifications. The factory "Crash Bar" may be left intact or removed for a sleek appearance and high clearance. If keeping the crash bar, they recommend adding the Brawler Skid Plate (sold separately), which conceals the crash bar and protects the electronic sway bar disconnect. This bumper is finished with SpyderShell Armor Coat which is an industrial grade, “super-durable” architectural finish in semi-gloss black. SpyderShell Armor Coat is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor after-market manufacturer.
Details

Full Width: This bumper is designed to give you maximum tire clearance, approach angles & ground clearance while extending out to protect your stock or aftermarket flares.


SpyderShell™ Armor Coat: This 6 stage coating system will keep your bumper protected and looking great for years to come from the abuse from the outdoors. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, "super-durable" architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather.


Brawler Bar: This sleek looking low profile bar helps to protect your grille as well as you r winch and radiator. Made of CNC laser-notched, NC-bent 1-3/4" diameter .120" wall DOM tubing this bar will stand up to whatever comes it's way giving you peace of mind. Note: Warn PowerPlant winches are not a direct-fit with the DOM Tube gussets (they may be installed with some minor modifications by the installer).



Recovery Strap
Ever off road recovery kit needs a quality tow strap in it. Poison Spyder has just what you need to add to you kit for your off road endeavors. This 3x30 recovery strap is made of military grade nylon fabric which will stretch 20% when in use to add to momentum when towing your buddies who are stuck on the trails. Another great thing about the nylon fabric is that it will not jerk around when the strap goes tight on a full throttle pull which sometimes can damage vehicles and on watching spectators. With a 24,250lbs capacity rating this tow strap will make the perfect addition to your recovery kit.

D-Rings
These heavy duty 3/4" Recovery Shackles are rated at a working load limit of 4-3/4 tons. Made of high quality steel and yellow zinc plated for corrosion resistance. The heavy duty D-ring and massive 7/8" threaded pin make a quick job of safely rigging recovery straps and winch cables. No 4X4 should be on the trail without a couple of these in the on board recovery kit. Sold by the piece.
Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 2-3 hours
Parts Included
Front Bumper
Hardware
2 D-Rings
Recovery Strap
  • Features: D Rings, Grille Guard, Integrated Fog Light Mounts, Integrated Winch Mount, Steel
  • Color: Semi-Gloss Black Powder Coat
  • Style: Full Width Bumper
  • Material: Steel
  • Jeep Wrangler 2-Door (JK)

  • 2018 Jeep Wrangler 2-Door (JK)
  • 2017 Jeep Wrangler 2-Door (JK)
  • 2016 Jeep Wrangler 2-Door (JK)
  • 2015 Jeep Wrangler 2-Door (JK)
  • 2014 Jeep Wrangler 2-Door (JK)
  • 2013 Jeep Wrangler 2-Door (JK)
  • 2012 Jeep Wrangler 2-Door (JK)
  • 2011 Jeep Wrangler 2-Door (JK)
  • 2010 Jeep Wrangler 2-Door (JK)
  • 2009 Jeep Wrangler 2-Door (JK)
  • 2008 Jeep Wrangler 2-Door (JK)
  • 2007 Jeep Wrangler 2-Door (JK)
  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2018 Jeep Wrangler Unlimited 4-Door (JK)
  • 2017 Jeep Wrangler Unlimited 4-Door (JK)
  • 2016 Jeep Wrangler Unlimited 4-Door (JK)
  • 2015 Jeep Wrangler Unlimited 4-Door (JK)
  • 2014 Jeep Wrangler Unlimited 4-Door (JK)
  • 2013 Jeep Wrangler Unlimited 4-Door (JK)
  • 2012 Jeep Wrangler Unlimited 4-Door (JK)
  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
Review Summary
Shared Media
Questions

Customer Submitted Photos

Poison Spyder 17-64-020DBTP1 Full Width Front Brawler Bumper with Shackle Tabs, Tube Gussetts & Brawler Bar in SpyderShell™ Armor Coat Reviews