Poison Spyder 17-62-010P1 RockBrawler II Rear Bumper in SpyderShell Armor Coat for 07-18 Jeep Wrangler JK

MULTI-FACETED BUMPER DESIGN: The RockBrawler II Rear Bumper's high clearance, multi-faceted design provides the best possible departure angles and corner obstacle clearance. Its appearance is streamlined and sexy, not like the squarish, boxy shape of many other bumpers on the market. The RockBrawler II Rear Bumper is slightly wider and deeper (front to back), when compared to the original RockBrawler Rear Bumper. This provides an increased degree of protection from corner impacts on the trail.

PLATE STEEL BUMPER CONSTRUCTION: The RockBrawler II Rear Bumper shell is constructed of CNC laser cut, brake-formed 3/16" plate steel. The multiple bends and facets actually lend even more strength to the bumper design. Unlike Poison Spyder's BFH Rear Bumper for JK, the RockBrawler II Rear Bumper can be mounted without cutting or altering the Jeep's frame rails.

RECESSED BACK-UP LAMPS: Very few JK rear bumpers come with provisions for mounting backup lamps. Of those that do, fewer still allow the use of high intensity, low power drawing LED lamps. The RockBrawler Rear Bumper's recessed light buckets accept 2-1/2" Round, Clear LED Lamps the same backup lamps we've sold with our Crusher Corners. The recessed buckets protect them from the rocks and direct light rearward rather than into the bumper interior, the way some competitor's bracket-mounted lamps do. Customers may choose to wire them into the reverse light circuit, or wire them to a separate dash switch as a loading or utility light. IMPORTANT: Note that the LED Lamps do NOT come with this bumper, they must be purchased separately.

INTEGRATED HITCH RECEIVER: The integrated hitch receiver accepts standard 2" hitches and recovery accessories. It is built in to the structure of the RockBrawler II Rear Bumper in order to provide a higher clearance, tougher hitch that's there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops. IMPORTANT: The integrated hitch receiver is not rated for towing. It is intended as a recovery attachment point only.

ROCK SOLID MOUNTING: The JK RockBrawler Rear Bumper incorporates an extra set of mounting bolts, along the bottom of the bumper which fasten into the rear crossmember. Combined with the mounting flange bolts at either side, the bumper is rigidly fastened by a total of 8 Grade 8 bolts, on three different planes to provide ultimate strength and rigidity to the mounted bumper.

RECOVERY SHACKLE TABS: The Heavy Duty Recovery Shackle Tabs are CNC machined from 1" thick steel billet, specifically designed to accept our Heavy Duty 3/4" Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. These Heavy Duty Recovery Shackle Tabs come as standard equipment on the RockBrawler II Rear Bumper.

OPTIONAL HI-LIFT JACK MOUNT: A custom Hi-Lift Jack Mount, sold separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed.

SpyderShell Armor Coat
Poison Spyder's SpyderShell Armor Coat has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Their proprietary 5-stage system starts with media blasting the entire part, to remove contaminants and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, “super-durable” architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor after-market manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship.