Save up to $115 with the purchase of Q-Series LED Headlamps & Fog Lights !
Of all the modifications you can add on your Jeep, replacing those weak, dim factory headlights with advanced Quadratec light emitting diode (LED) lights ranks right there at the top. It's certainly easy to 'see' why. Our LEDs are plug-and-play masterpieces that require no additional modification, install in about a half hour, and give you a lighting experience that will leave you nothing short of amazed - nearly doubling the factory lumen output at both low and high beam while requiring less amp draw.
If that wasn't enough, we only use die-cast aluminum housings and crystal clear polycarbonate lenses to provide optimum protection against impacts, while protecting the solid state electronics and powerful Phillips® brand LEDs with water tight epoxy seals.
Quadratec's LED headlights exceed DOT and federal motor vehicle safety standards (FMVSS #108) and are approved for highway use in all 50 states. They are marked DOT SAE at bottom of lens (see additional images for exact location). We believe these LED headlights will make such a difference for your nighttime driving that we back them with our 3-year exclusive Limited Warranty.Quadratec Fog Lamps
For the best off-road experience, trust the best off-road fog lights around - Quadratec's durable LED Fog Light Kit. This exclusive fog light kit combines the industry-leading power of 10W American made Cree LEDs into compact housings, all while giving you the ability to use the factory fog light harness for true plug-and-play ease.
Each LED fog light has a super bright white 6000°K output that is very close to natural sunshine and lamps include a 6” long extension with industry-standard Deutsch-style and Mopar compatible connectors to allow for relocation.
Available in your choice of 10° driving beam or 30° flood beam patterns, these fog lights mount on stainless steel posts with stainless hardware and feature powder-coated aluminum housings built to endure aggressive off-road use.
Includes Quadratec’s 3 Year Limited Warranty. Fog lamps are not legal for use on public roadways and are intended only for off-road use.
1) Die cast metal housing with heat sink fins
2) Weather tight epoxy seals
3) Advanced photometric multi-surface Low-Beam Reflector
4) LED Low-Beam chip
5) Die cast metal light mount Heat Sink
6) Shatter resistant Polycarbonate Lens
7) Quality Stainless Hardware
8) LED High-Beam chip
9) Advanced photometric multe-surface High-Beam Reflector
10) Custom Plug-n-Play Connector
- Features: LED
- Color: Clear or White
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (TJ)
- 2006 Jeep Wrangler Unlimited (TJ)
- 2005 Jeep Wrangler Unlimited (TJ)
- 2004 Jeep Wrangler Unlimited (TJ)
Quadratec LED Headlamp Upgrade Conversion & LED Fog Lights Kit Options
|Part Number||Catalog #||Price|
|97109.0060||97-04 10° Spot Beam||$439.98|
|TJ KIT||97109.0061||97-04 30° Flood Beam||$439.98|
|97109.0062||05-06 10° Spot Beam||$439.98|
|TJ KIT||97109.0063||05-06 30° Flood Beam||$439.98|
Customer Submitted Photos
Quadratec LED Headlamp Upgrade Conversion & LED Fog Lights Kit Reviews
The instructions were good and installation was quick. The only thing that was an issue is the screw that held the fog lights was larger than the factory (original) and I had to drill it out.
Oh, one more thing...where I tried to tighten the fog light the screw spun within the housing. I had to wedge a screwdriver in next to the nut for it to tighten.
Put in service several months ago. Jeep is only driven 4- 5,000 miles per year and garaged. Fog light failed by rain water getting inside lens within weeks. The light beam projected by the headlights is not well projected.
BRIGHT! Wow, very impressed with the way they light things up. Headlights were Very easy to install. Had to do some engineering with the fog lights due to the fact I have the tubular bumper that I bought from Quadratec also. The wiring was easy, even though I had to cut the plug from the original fog lights and splice with the pigtail.