Quadratec Modular Winch Ready Front Bumper & Q9500si Stealth Winch for 07-18 Jeep Wrangler JK

Quadratec's Q9500is Stealth Winch utilizes a die cast finned aluminum solenoid housing that dissipates heat under heavy winch loads while providing rugged durability. Its powerful 4.8 HP series wound motor and class leading low gear ratios provide fast line speeds while the battery friendly low current draw gives you generous winching time from your battery charge.

The charcoal gray synthetic winch line also contains Dyneema® fiber, which is stronger and more durable than steel winch cables yet soft and flexible. Weight for weight, Dyneema® is 15 times stronger than steel and its light weight significantly improves the ease of handling. Dyneema® will not rust, kink and lose strength like steel cables can over time. In fact, when properly cared for, Dyneema® winch lines can outlast steel winch cables. Plus, synthetic winch lines are much safer and easier to use as steel cables can sometimes shed wire splinters from handling. In the unlikely event of a synthetic winch line breaking there is virtually no recoil, where steel wire breakage can be extremely dangerous.

The ease of handling, increased safety, and improved longevity of Dyneema® are why so many off road enthusiasts are making the switch. The Q9500i Stealth Winch features 90' of synthetic winch line with a ballistic nylon chafe guard to protect your line from abrasions. Each winch line is 3/8" diameter and rated for 18,000 lbs. Includes our Winch Operator's Guide with helpful information on winching and the care and use of synthetic line.

You also receive an industry best Limited Lifetime Warranty on mechanical parts and a 1-year Warranty on all electrical components.

Features Included:

• Class Leading Line Pull Ratings for Extra Pulling Capacity
• Heavy Cast Aluminum - Heat Dissipating Solenoid Housing
• Pre-Assembled and Pre-Wired with Simplified Installation
• Superior Off Road Durability with Rugged Sleek Looks
• Hefty Clutch Control
• Case Hardened Input Gears
• Case Hardened Intermediate Gears
• Case Hardened Output Gears
• Stainless Steel Hardware Throughout
• Case Hardened Hex Drive Shaft
• Load Holding Brake System
• Winch Drum is Case Hardened
• High Strength Aluminum Tie Bars
• Shaft Coupler is Case Hardened
• Solid Copper and Brass Power Terminals
• Durable Powder Coat Finish
• Powerful 4.8 Horsepower Series Wound Motor
• Heavy Duty Integrated Solenoid
• Dyneema® Synthetic Rope 90' x 3/8"
• Forged Steel Clevis Hook
• Nylon Safety Hook Strap
• High Visibility Rubberized Winch Remote with 12' Cord
• Solid Copper Battery Cables
• Aluminum Hawse Fairlead

Installation Notes

Installation Difficulty:

Level 2Intermediate

Installation Time: 3-5 hours

Bumper

Installation
Instructions

Wich

Installation
Instructions

User Guide

Installation
Instructions

Parts Included

• Front Bumper
• Hardware
• Q9500is Stealth Winch
• Black Aluminum Hawse Fairlead
• 90' x 3/8" Dyneema® Synthetic Rope
• Black Forged Steel Clevis Hook
• Nylon Safety Hook Strap
• 12' Wire Remote Control
• Installation Hardware