Whether you need a trail flag for dune bashing, sand racing, trail riding, rock crawling, or to meet safety spec, the Quadratec Trail Flag with Mount Kit is for you. This easy to install kit was specifically designed for the JL Wrangler. It conveniently bolts onto the left side of the factory spare tire bracket. The included five-foot flag pole is made from tough white fiberglass composite rod, and features a bright red nylon flag. The flag has reinforced stitching, so it can hold up to highway speeds without tearing or fraying. For corrosion resistance, the bracket is made from high quality stainless steel.
Made in USA Exclusively for Quadratec.
User Friendly Design: The Quadratec Trail Flag with Mount Kit was specifically designed for use with the JL Wrangler. Installation is 100% bolt on, and no cutting, drilling, or other modifications are required.
Stainless Steel Construction: For corrosion resistance and added longevity, the Quadratec Trail Flag Mounting Bracket is made from high quality stainless steel, and features stainless hardware.
Quick Detach Option: This bracket is compatible with the Quadratec Stainless Steel Quick Disconnect for CB Antennas & Trail Flags (sold separately). Without tools, the Quick Disconnect allows you to conveniently remove your trail flag when it is not needed.
Made in the USA: To ensure quality, every Quadratec Trail Flag with Mount Kit is proudly made right here in the United States.
Trail Flag Specs:
Flag Pole Length: 5’ (152.4cm)
Flag Dimensions: 8” x 12” (203mm x 305mm)
Thread Size: 3/8" x 24
Shipping Dimensions: 60" x 4" x 4" (150cm x 10cm x 10cm)
Shipping Weight: 2lbs (<1kg)
- Features: Stainless Steel
- Color: Bare Steel
- Shipping Weight: 2lb
- Shipping Dimensions: 60in x 4in x 4in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Customer Submitted Photos
Quadratec Trail Flag with Mount Kit Reviews
This works great with the stock spare tire carrier, with or without the Mopar tailgate reinforcement. The flag is adequate, but not up to high-speed driving. Get a quick-disconnect fitting and use the flag only on the trail. The flagpole has bent as needed (overhanging trees, etc.) and has one small tear in the white cover layer. It has not snapped back and hit the roof like a steel flagpole (like a CB antenna) would do. Some sand-hill parks may require the flag to be higher than achieved with this pole and mount. The dune buggies at Sand Hollow State Park (Utah) all had flags a foot or so higher, but no one challenged me on this rule.
Recieved and installed without issue. Can not test on trail without the X2O Smittybilt winch ordered two months ago thru Quadratec . Receive emails weekly from Quadratec with ship dates that come and go. Net result, no winch.
This is essentially a mirrored version of their CB antenna mount. Hence, all design flaws and strengths here. Rock solid, invisible, doesn't interfere with any operations, but the pole fastener is hard to reach, when you have your spare tire mounted. This is not an issue for an antenna, but a flag is what you put on and off frequently.