Enhanced Ground Clearance and Aggressive Stance: The 7" lift kit significantly raises your Bronco's ride height, allowing for larger tires and providing an aggressive, commanding presence on and off the road.
Improved Suspension Geometry: Equipped with forged aluminum upper control arms, the kit enhances suspension geometry and alignment, leading to improved handling and ride quality.
Comprehensive Lift Components: The kit includes heavy-duty steering knuckles, steel tubular upper control arms, differential brackets, and drop cross members, all designed to reduce CV and ball joint angles, ensuring durability and performance.
The Rough Country 7-inch lift kit gives your Ford Bronco an improved, aggressive stance. This suspension kit provides everything needed to lift your vehicle, giving you increased ground clearance to run larger tires while reducing the nose-down factory look for a commanding presence.
This suspension kit combines the use of durable steel knuckles, forged aluminum control arms, differential brackets, and drop cross members to reduce cv angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit included is a rear track bar and brake line relocation brackets that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 40" tires with proper wheel backspacing.
Minor cutting and a strut compressor are required to install, an estimated timeframe of 6-8 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly!- FEATURES
- Increased ground clearance.
- Aggressive, good looks.
- Levels the front with the rear.
- Forged Aluminum upper control arms for improved suspension geometry and alignment. NOTES - IMPORTANT
- ONLY fits 4-door base models.
- An aftermarket bumper is required to clear 40" tires.
- Does NOT fit Bronco Sport models.
- Does NOT fit Badlands, Wildtrack, or First Edition models.
- Does NOT fit models equipped with Sasquatch Package.
- Does NOT fit models equipped with HOSS suspension system.
- Upper Strut Spacers
- Lifted Knuckles
- Forged Aluminum Control Arms
- Pre-load spacers
- Lower Strut Spacers
- Crossmember
- Skid Plate
- Differential Drop Brackets
- Driveshaft Spacer
- Hardware
- Upper Strut Spacers
- Track Bar Bracket
- Shocks Included: Without Shocks
- Max Tire Size: 40
- Lift Height Range: 5 inch and up
- Shipping Weight: 154lb
- Shipping Dimensions: 50in x 35in x 20in (L x W x H)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review