Rough Country 70959 MLC-6 Multiple Light Controller for 07-18 Jeep Wrangler JK
Vehicle Specific Design: The Rough Country MLC-6 Multiple Light Controller was engineered to work with all JK Wranglers. The under-hood relay pod fits with all factory engines, and the windshield mounted switch pod is compatible with all trim packages.
Versatile Application: Whether you want to control lights, lockers, air compressors, or any other electric accessories, the Rough Country MLC-6 Multiple Light Controller has you covered.
Switch Panel: The MLC-6’s switch pod includes 6 rocker style switches. These switches are backlit with blue LEDs. There is a convenient button on the switch pod that can be used to turn off the backlighting.
Heavy-Duty Construction: Rough Country uses 8-gauge, high-temp, abrasion resistant cables for their power leads. For additional conductivity, the terminals are both soldered and crimped.
Low Voltage Cut Off: The Rough Country MLC-6 Multiple Light Controller features an integrated Low Voltage Cut Off (LVCO) circuit. This means the MLC-6 will automatically shut off if you are in danger of draining your battery. The circuit can be easily bypassed by removing the included fuse.
Power Distribution Block The under-hood relay pod has a 12-position terminal block for use with up to 6 independent circuits. The included mounting bracket and hardware are vehicle specific and easy to install.
Rough Country MLC-6 Multiple Light Controller Specs:
Terminal Block Positions: 12
Relays: 6 x 40-amp Cubes
Fuses: 6 x 30-amp ATO Fuses
Field Collapse Protection: 6 Diode
Inline Circuit Breaker: 50-amp Manual Reset
Level 3Advanced- MLC-6 Switch Pod
- Rocker Switches (Qty 6)
- Switch Pod Wiring Harness
- Switch Pod Mounting Bracket Pair
- Relay Pod
- Relay Pod Power Wire
- Relay Pod Ground Wire
- Mounting Hardware
- Color: Black
- Shipping Weight: 8lb
- Shipping Dimensions: 17in x 12in x 9in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rough Country MLC-6 Multiple Light Controller Reviews
I’ve never liked the above the windshield mount and that little skinny tray in front of your shifter (if it’s an automatic) is basically useless, so about 20 min after the ups man dropped this off I was taking a dremel to it to get it at a good angle to put on my lower dash and it came out pretty good. Not perfect, it I’m happy. And it’s nice that the main board fits the JK perfectly and makes an easy and clean wiring setup
Great design, straightforward install! Very happy with the kit!
Very easy to install one of my switches since first week did not light up, the switch works perfect still. I did check the wires on the back of the switch when had the issue the led blue light would work, not work flicker, and then it stopped working would totally buy again. I could get a new switch pop a new one in it but not worried about the light
Questions
