Upgrade your Jeep’s drivetrain with the Rough Country Rear CV Drive Shaft. This 100% bolt on driveshaft was specifically engineered for use with late model 4-door JK Wranglers. With a heavy-duty design and Brute Force Red Seal u-joints, this drive shaft is twice as strong as the factory version. Best of all, Rough Country designs and manufactures all of their driveshafts right here in the USA!
Installation Note: This CV Drive Shaft is meant for use with 3.5-6” of Lift
Vehicle Fitment: The Rough Country Rear CV Drive Shaft is designed to work with Unlimited Wrangler JKs with a minimum of 3.5” to 6” of lift. It is only compatible with four-door Jeeps.
Heavy-Duty Design: This drive shaft is twice as strong as the factory drive shaft. It features greaseable Brute Force Red Seal u-joints, and a double cardan design.
Bolt-On Installation: For ease of install, the Rough Country Rear CV Drive Shaft mounts to your Jeep without cutting, drilling, or other modification. This kit a CV drives shaft, yokes, and installation hardware.
Collapsed Length: 41.25in
Extended Length: 44.75in
- For Use with 3.5-6in of Lift
- Fits both Dana 30 and Dana 44 Front Axles
- CV Drive Shaft
- Transfer Case Yoke
- Pinion Yoke
- Installation Hardware
- Engine: 3.6L
- Transmission: Automatic, Manual
- Location: Rear
- Shipping Weight: 26lb
- Shipping Dimensions: 56in x 7in x 9in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
Customer Submitted Photos
Rough Country Rear CV Drive Shaft Reviews
The quality of this driveshaft is great. If you have a lift higher then 4", I would highly recommend you go with a different company for a DS. I recently put on the Rough Country 6" X-Factor lift and purchased both the front and rear DS to go with the lift. When I installed the rear DS there was 2" of the blue spline showing. I called Rough Country and they stated that it was fine. When driving I got a bad vibration at 50 mph. I brought my Jeep to a shop that specializes in drivelines and they told me my driveshaft was to short. When I called rough country back they told me that is the only size DS they sell for that lift and if I wanted I could send the DS back for a full refund. Well, one size does not fit all. The shop said they would fix the problem and extend the DS 3" so that it would be good to go. I got it back and reinstalled the rear DS and...no more driveline vibration.