Rough Country 1072 Transfer Case Lowering Kit for 84-01 Jeep Cherokee XJ & Comanche MJ
Something to consider when lifting your Jeep is the angle of the rear driveshaft. Improper driveline geometry causes unnecessary wear and vibration. The Rough Country Transfer Case Lowering Kit is designed to optimize the rear driveshaft angle on XJ Cherokees and MJ Comanches. This 100% bolt on kit features rubber puck transfer case skid plate spacers and extended hardware.
Installation Note: This Transfer Case Lowering Kit is for Use with 4.5-6.5in of Lift
Vehicle Specific Design: The Rough Country Transfer Case Lowering Kit is engineered for use with Jeep Cherokees and Comanches with 4.5 to 6.5 inches of lift.
Bolt-On Application: For ease of install, the Rough Country Transfer Case Lowering Kit mounts to your Jeep without cutting, drilling, or other modification. The tubular spacers fit between the transfer case skid plate and the frame.
Driveline Geometry: By moving the rear transfer case output yoke, the Rough Country Transfer Case Lowering Kit improves rear driveshaft angles.
- Transfer Case Model: NP231, NP242
- Shipping Weight: 2lb
- Shipping Dimensions: 13in x 5in x 3in (L x W x H)
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Jeep Comanche (MJ)
- 1992 Jeep Comanche (MJ)
- 1991 Jeep Comanche (MJ)
- 1990 Jeep Comanche (MJ)
- 1989 Jeep Comanche (MJ)
- 1988 Jeep Comanche (MJ)
- 1987 Jeep Comanche (MJ)
- 1986 Jeep Comanche (MJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
