Rough Country 1668TC Transfer Case Lowering Kit for 97-02 Jeep Wrangler TJ
Something to consider when lifting your Jeep is the angle of the rear driveshaft. Improper driveline geometry causes unnecessary wear and vibration. The Rough Country Transfer Case Lowering Kit is designed to optimize the rear driveshaft angle on an early model TJ Wrangler. This 100% bolt on kit features tube steel transfer case skid plate spacers and extended hardware.
Installation Note: This Transfer Case Lowering Kit is for Use with 4-6in of Lift
Driveline Geometry: By moving the rear transfer case output yoke, the Rough Country Transfer Case Lowering Kit improves rear driveshaft angles.
Bolt-On Application: For ease of install, the Rough Country Transfer Case Lowering Kit mounts to your Jeep without cutting, drilling, or other modification. The tubular spacers fit between the transfer case skid plate and the frame.
Vehicle Specific Design: The Rough Country Transfer Case Lowering Kit is engineered for use with early model TJ Wranglers with 4 to 6 inches of lift.
- Transfer Case Model: NP231, NP242
- Shipping Weight: 12lb
- Shipping Dimensions: 30in x 5in x 3in (L x W x H)
Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rough Country Transfer Case Lowering Kit Reviews
Did not come with the two different rails. Both rails were the bottom one with two holes close together and the third at the end. UnBle to do anything with this other than return for a refund. Thank you Rough Country for wasting my time..