Material: This bed cover is made from strong lightweight black aluminum. Each slate is then pressure bonded to a matte black fabric giving you the best in durability.
Sleek Look: With a nice low profile look your JT will gain a clean look that when rolled up will not interfere with your visibility out of your rear window.
Easy Access: Rear latches make it easy to roll this bed cover up while the Quick Release System makes installing or removing in minutes.
- Bed Cover
- Features: Cargo Cover
- Color: Black
- Shipping Weight: 61lb
- Shipping Dimensions: 61in x 13in x 11in (L x W x H)
Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Customer Submitted Photos
Rugged Ridge Armis Hard Rolling Bed Cover Reviews
Delivery was quick and the cover was well packed. I had a little damage to the bottom weatherstrip installed on the side rails. Instructions could be a little better especially about the front corner seal blocks and mounting the cover to the rails. I called Rugged Ridge support, but they were little help. Once I got the cover installed, I had to go back and make some adjustments to the side rails to get a proper fit, but after than I had no fit issues as others had noted. If you have the spray bed liner you will have to clean out the holes in the front of the bed before trying to install the fasteners. I only have 2 complaints with the cover;
a) the seal at the tail gate sucks, but it looks like an easy mod to improve this.
b)There should be an intermediate support for the side rails or the side rails should be a littler stronger. If you do not loosen the velcro sides before trying to role the cover, it lifts (bows) the side rails.
For $1000, it shouldn't require any modifications. We will see how it holds up.
Very high quality product. Does not flap while driving 75+. Be advised, this does require the trail rail system. Videos here and description say it does not but it will only install if you have that. I feel like it could be a bit wider to make it even more watertight but I don’t get any rain in the bed while driving. I have noticed some going thru a car wash.
Not worth the money. Does not fit the gladiator bed well. End by tailgate requires rails to actually be inside the dimensions of the truck bed rails to latch the end down. You can see the crack between rails and truck bed. Latching system seems flimsy. Does not line up with the sides of the bed at all. Horrible experience with installation. Had to go buy different bolts to install as the head of the tork drive bolts immediately stripped out. Spent almost 3 hours installing something that should have been simple. One of the rails out of the box came with the foam seal stuck to the cardboard box which tore off the rail and tore apart the seal. All said and done does not seem like a product that cost $1000 +. if I had to do over would find a different cover.