Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper with Stinger Bar & Quadratec Q9000 Self Recovery Winch in Black for 84-01 Jeep Cherokee XJ

Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper

Raised corners mean better entry and exit under extreme conditions. Bumpers have a one piece welded design made from a two-stage, textured, matte-black powder-coated finish. Each bumper has high-degree approach angles & raised corners for maximum ground clearance. Bumpers are manufactured out of 3/16" cold rolled steel that is robotically welded to exact specifications. The optional front bull bar is manufactured from 1.75" tubing and has two light tabs that can accommodate up to a 9" light. Its unique built-in winch plate design is capable of mounting up to a 15,000 lb winch. Other features are solid mount D-ring welds on the inside and out. D-rings sold separately.

Features

• Manufactured from 3/16 cold roll steel
• Optional Stinger Bar Heavy Duty 2" x .120 wall construction
• Raised corners for better entry and exit under the most extreme conditions

• Solid Mount D-Rings - Welds on the inside and out!

• Built in winch plate to accommodate up to 15k winch

• One-Piece welded design
• In built Hi-Lift mount points
• Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty

• Smittybilt Advantage Warranty
  
  

Quadratec Q9000 Self Recovery Winch

Now you can take advantage of Quadratec's massive purchasing power to get the lowest price of any winch in this class. Our engineers work directly with the factory to provide solutions which are specifically tailored to your Jeep®. Our powerful 4.8hp series wound motor and class leading low gear ratios give fast line speed with a Battery Friendly low current draw. You will get the most winching time from your available state of battery charge. We give you an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Detailed installation instructions and a handy glove compartment sized Owners Manual with Winching Guide are included.
All Q Series Winches include two sets of solenoid brackets for side mounting or top mounting.

Features Included:
1 Hefty Clutch Control
2 Case Hardened Input Gears
3 Case Hardened Intermediate Gears
4 Case Hardened Output Gears
5 Stainless Steel Hardware Throughout
6 Case Hardened Hex Drive Shaft
7 Load Holding Brake System
8 Winch Drum is Case Hardened
9 High Strength Aluminum Tie Bars
10 Shaft Coupler is Case Hardened
11 Solid Copper and Brass Power Terminals
12 Durable Powder Coat Finish
13 Powerful 4.8 Horsepower Series Wound Motor
14 Heavy Duty Solenoid with 2 Bracket Locations
15 Galvanized Aircraft Cable 100' x 3/8"
16 Stainless Steel Safety Latch
17 Forged Steel Clevis Hook
18 Nylon Safety Hook Strap
19 High Visibility Rubberized Winch Remote with 12' Cord
20 Solid Copper Battery Cables
21 Zinc Plated Roller Fairlead

Installation Notes

Installation Difficulty:

Level 2Intermediate

Installation Time: 2-3 hours

Parts Included

Front Bumper Stinger Bar Mounting Hardware Q9000 Winch Zinc Plated Roller Fairlead 100' x 3/8" Aircraft Cable Forged Steel Clevis Hook Nylon Safety Hook Strap 12' Wire Remote Control Remote Solenoid Box Motor Mounted Solenoid Box Mount Center Mounted Solenoid Box Mounts Installation Hardware