Synergy Manufacturing 8807-03 Steering Stabilizer Relocation Kit for 18-24 Jeep Wrangler JL with 1-1/2in Diameter Tie Rod (Synergy)
Tie Rod Specific Design: To accommodate either factory or aftermarket steering linkage, the Synergy Manufacturing Steering Stabilizer Relocation Kit is available in two sizes. Select from either 1-5/8in (factory size), or 1-1/2in (Synergy Manufacturing).
Easy Installation: The Synergy Manufacturing Track Bar/Steering Stabilizer Mount Stud replaces the OEM track bar bolt. Installation can be completed with simple hand tools, and it bolts directly into the factory location. The Tie Rod Mount Clap conveniently wraps around the tie rod.
Stabilizer Relocation: By moving the steering stabilizer up and out of the way, the Synergy Manufacturing Steering Stabilizer Relocation Kit increases off-road clearance. This low-profile mounting solution is compatible with either factory or upgraded Synergy steering components.
Level 3Advanced- Synergy Manufacturing Track Bar/Steering Stabilizer Mount Stud (Part # 8806-01)
- Tie Rod Stabilizer Mount Clamp
- Features: 1-5/8 Inch
Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Synergy Manufacturing Steering Stabilizer Relocation Kit Options
| Part Number | Catalog # | Tie Rod Option | Price | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 16315-6582 | 1-1/2in (Synergy) Tie Rod | $105.00 | |||||||
| 16315-6291 | 1-5/8in (Factory) Tie Rod | $105.00 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Synergy Manufacturing Steering Stabilizer Relocation Kit Reviews
Moves stabilizer up out of harms way. Looks good!! Been on for a while now and no issues.
The collar is steel, others I have seen are aluminum which I think is wrong for this application. The collar without the bolt weight was 1.4 lbs.
When turning all the way to the left the boot of the steering stabilizer gets squished about as much as it can take and the big bottom link gets pushed around it's flex joints but it appears to be OK so far after a few days and the stabilizer is perfectly parallel with the lower link. The boot seems to get cleaned regularly by this flexing. The screw that holds stabilizer in place was so small I replaced it with a longer one that I had and used a couple thick precision washers and put blue thread lock on it. And I put the little screw in the glove box in case that one breaks.
The vehicle, 2021 Ecodiesel Gladiator.
Easy to install. Quality item.
