TACTIK JT-2600C-36W 7.5" LED Light Bar
Quadratec Part #:
97109-4000
In Cart Price
$34.99
Guaranteed Best Price
$34.99
In Stock
Ships today if you order within 9 hours 36 min.
Description
Tactik’s LED light Bars combine the industry-leading power of American made Cree LEDs that exhibit super bright white 6000°K output that’s close to natural sunshine. Tactik kits are an incredible value for the money and include a pre-terminated wiring harness with relay and switch providing a quick and easy installation. Tacktic LED Light Bars are available in 4 widths and feature weather tight Deutsch-style connectors and stainless steel hardware. The durable, powder-coated and include cast aluminum mounting posts that are adjustable. Assemblies have an IP67 waterproof rating and feature combination 8° driving beam and 90° flood beam patterns. The 8° narrow beam LEDs provide light output for driving at higher speeds with longer projection with less peripheral lighting. The 90° flood LEDs provide ideal peripheral lighting for off road trail riding at lower speeds. Lamps are not legal for use on public roadways and are intended only for off-road use.
Popular Similar Items
Details
2160 Lumen Rating
- Color: Black
- Size: 4 inch to 9 inch
- Light Pattern: Combo, Flood, Spot
- Shipping Weight: 2lb
- Shipping Dimensions: 18in x 5in x 5in (L x W x H)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
TACTIK 7.5" LED Light Bar Reviews
Ralph H.
8/6/2025
Used it for a rear light when hooking up my trailer. Works great.
Shayne H.
5/3/2023
Great durable light with good wiring harness
Kenny T.
10/23/2022
Fits Paramount bumper from Quadratec.
Questions
Dallas M.
Purchased this tactik led light. Can you tell me how to wire the light to the aux switch in my 2020 JT. Is there info on what to cut wire wise?
Yes, you can wire the TACTIK JT-2600C-36W 7.5" LED Light Bar directly to one of the factory auxiliary switches in your 2020 Jeep Gladiator JT by connecting the light's positive power lead to the corresponding pass-through auxiliary wire located in the engine bay (near the power distribution center/fuse box).
Wire Modification Guidance: You do not need to cut into the factory harness or vehicle wiring. To interface the light bar with the auxiliary switch:
Locate the blunt-cut factory aux switch wires in the engine bay (typically bundled near the firewall/battery area).
Strip the end of the chosen auxiliary wire (such as Aux 1 through 4, depending on your amp draw requirements) and connect it directly to the positive power wire of the light bar (usually using a waterproof butt connector, solder, or a heat-shrink terminal).
Connect the light bar's negative/ground wire directly to the factory grounding point nearby on the inner fender or negative battery terminal.
Keep the inline fuse and relay harness that came with the light out of the loop (or remove them) since the factory auxiliary switch bank already features built-in relay protection and dedicated fuses in the power distribution center.
Wire Modification Guidance: You do not need to cut into the factory harness or vehicle wiring. To interface the light bar with the auxiliary switch:
Locate the blunt-cut factory aux switch wires in the engine bay (typically bundled near the firewall/battery area).
Strip the end of the chosen auxiliary wire (such as Aux 1 through 4, depending on your amp draw requirements) and connect it directly to the positive power wire of the light bar (usually using a waterproof butt connector, solder, or a heat-shrink terminal).
Connect the light bar's negative/ground wire directly to the factory grounding point nearby on the inner fender or negative battery terminal.
Keep the inline fuse and relay harness that came with the light out of the loop (or remove them) since the factory auxiliary switch bank already features built-in relay protection and dedicated fuses in the power distribution center.
Jason W.
A followup to my question regarding fitment on the Tactik HD front bumper, in another question you state that the mounting distance is 9 9/16 cl. When I measured the light tabs on the Tactik bumper it is 11 3/4 cl. I am confused on how it would fit if the measurements are different.
It is understandable how those different measurements would be confusing. The reason the TACTIK JT-2600C-36W 7.5" LED Light Bar fits despite the measurement discrepancy is due to the sliding track mounting system on the bottom of the light bar.
Jason W.
Will this light bar fit the mounting tabs on the Tactik HD front bumper with hoop (part # 12052-0141)?
Yes, the TACTIK JT-2600C-36W 7.5" LED Light Bar is specifically designed to be compatible with the mounting tabs on the Tactik HD Front Bumper with Hoop (Part # 12052-0141).
