Teraflex 1753420 Alpine IR Front Adjustable Track Bar for 18-20 Jeep Wrangler JL & Gladiator JT with up to 6" Lift
The track bar in a Jeep Wrangler JL and Gladiator JT is designed to keep the front axle centered. After adding a lift and larger wheels and tires, the stock track bar will see more force and may even cause the axle to be out of center. With a Teraflex Alpine IR Front Adjustable Track Bar you can center the axle to improve steering response and the heavy-duty upgrade will provide more strength to avoid bending and damage flexing on the trails. Installed using the existing brackets and hardware, adjustments with the turnbuckle style sleeve do not even require removing the track bar.
Note: Adjuster sleeve bolts(10mm bolts) should be tightened simultaneously in 5 ft-lb increments until both reach 70 ft-lbs.
Adjustable: A range from 0.5” shorter to 1” longer than the stock track bar will allow for use loaded down at stock height up to 6” of lift.
Forged Steel: The backbone ridge adds reinforcement to the heat-treated alloy steel making it a very strong design.
Upgradeable: Installs directly to the stock track bar mounts. Options are available to upgrade the axle side mounts(sold separately).
- Front Adjustable Track Bar
- Preinstalled IR Joints
- Features: Adjustable, Front, Steel
- Shipping Weight: 21lb
- Shipping Dimensions: 38in x 7in x 4in (L x W x H)
Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Customer Submitted Photos
Teraflex Alpine IR Front Adjustable Track Bar Reviews
SO HEAVY! Replaced my stock track bar with this one, and I am SO glad I did. Bump steer is all but gone and I have zero vibration in my steering wheel now. Don't know if it's from the weight of the bar, the better bushings over stock, or the fact of re-centering the axle, but I wish I would have done this months ago! Highly recommend this track bar!
Superb quality finish really looks very strong. Gentlemen from Teraflex, why not also offer one for the back. Please :-)
This is a 19 pound monster! It is heavy, sturdy, well made and fairly straightforward to put in . Make sure you have a 1 3/8" wrench to adjust it with.