Teraflex 14-02-33-400-000 Falcon SP2 3.3 Fast Adjust Piggyback Shocks for 20-26 Jeep Gladiator JT with up to 1.5" Lift
Piggyback Shocks: The additional reservoir of the Falcon Series 3.3 Fast Adjust Piggyback Shocks increases the shocks gas and oil capacity. This allows the shocks to stay cool, even under harsh conditions. Heat buildup causes fade and diminishing shock performance.
Rear Roost Guards: Included roost guards protect the rear shocks from rock chips and off-road hazards.
Adjustable: Using Falcon’s fast adjust knobs you can select from three different compression settings. For finer damping adjustments, there is an eight-position dial. This allows you to tune your shocks to your specific environment or driving style.
Shock Oil: For increased thermal stability, Teraflex uses full synthetic Red Line shock oil. This oil contains anti-wear and lubricity additives and has a high viscosity index of 519.
Rust Proof Hardware: All hardware withstands a 1,000-hour salt spray corrosion test.
SP2 Mode Adjust: Choose between two settings during install by simply twisting the shaft counterclockwise for Soft and clockwise for Performance.
Level 2Intermediate- Pair Front Shocks
- Pair Rear Shocks
- Features: Dual Speed Compression Adjustment, Nitrogen Charged, Piggyback Reservoir or Piggyback Reservoir
- : Front and Rear
- : 0.00, 1.00, 1.50 or 2.00, 2.50, 3.00 or 3.50, 4.00, 4.50
- : 0 - 1.5 inch or 2 - 3 inch or 3.5 - 4.5 inch or 0-1.5 inch
- : SP2 Mode Adjust
Jeep Gladiator (JT)
- 2026 Jeep Gladiator (JT)
- 2025 Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Teraflex Falcon SP2 3.3 Fast Adjust Piggyback Shocks Options
| Part Number | Catalog # | Model | Lift Height | Price | |||||
|---|---|---|---|---|---|---|---|---|---|
| 14-02-33-400-000 | 16195-0240 | Gladiator JT | 0-1.5in | $1,971.99 | |||||
| 14-02-33-400-150 | 16195-0241 | Gladiator JT | 2-3in | $1,971.99 | |||||
| 14-02-33-400-200 | 16195-0242 | Gladiator JT | 3.5-4.5in | $1,971.99 | |||||
| 14-02-33-400-002 | 16991-0018 | Gladiator JT - EcoDiesel Overland & Rubicon | 0-1.5in | $1,971.99 | |||||
| 14-02-33-400-152 | 16991-0019 | Gladiator JT - EcoDiesel Overland & Rubicon | 2-3in | $1,971.99 | |||||
| 14-02-33-400-202 | 16991-0020 | Gladiator JT - EcoDiesel Overland & Rubicon | 3.5-4.5in | $1,971.99 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
1. Required Adaptation Kit
The Mojave trim uses a unique front suspension with larger mounting posts compared to other Gladiator trims. To install Falcon shocks, you must purchase the JT Mojave: Front Shock Bushing Kit (Part #61-99-01-001).
Purpose: These bushings have a larger inside diameter (I.D.) specifically designed to slide onto the Mojave’s beefier front shock mounting posts.
Note: Without this kit, the standard bushings included with the shocks will not fit over your factory mounts.
2. Selecting the Correct Lift Height
Even though your Gladiator Mojave is "stock," it actually sits 1 inch higher in the front than a standard Rubicon or Sport model.
Recommended Version: You should select the 0–1.5" Lift Version of these shocks. Using a version designed for a 2"–3" lift on a stock Mojave could lead to the shocks "bottoming out" during compression, which can cause permanent internal damage.
