Home » Jeep Electrical » Switches » Switch Pods » Trigger Solid State Bluetooth 6 Relay Switching System

Trigger 3001 Solid State Bluetooth 6 Relay Switching System for 07-18 Jeep Wrangler JK

Quadratec Part #: 17004.6001
Trigger Part #: 3001
Conveniently run multiple accessories and auxiliary lights with the Trigger Solid State Bluetooth 6 Relay Switching System. This system allows you to control up to 2 circuits without creating a mess of wiring under your hood. No wiring needs to be routed through the firewall, and no cutting or drilling is required for installation. The included 6 switch controller uses RF to operate the control module. Trigger has also developed a free accessory control App for iPhone, and Android phones. The App will allow users to control lighting functions from outside the vehicle via Bluetooth. All necessary wiring and hardware is included for the installation. Under hood mounts are available separately, and are vehicle specific.

Go Wireless: The Included Bluetooth Capable Control Box Mounts Out of the Way in The Engine Bay, and Eliminates the Need to Run Wires Through the Firewall and into the Dash. No More Messy Wiring! Go Even Further and Mount Several Control Boxes Together and Wirelessly Control Up to 24 Accessories! The Internal RF Remote Mounts Inside the Jeeps Cabin and Has Easy to Read, Back-Lit Buttons That Operate all Accessories Easily.

Total Control: Apps Are Available for Both iOs & Android Phones That Give the Capability for Turning On and Off Accessories All With a Simple, Easy to Use Interface. The App Will Stay On While In Use and Plugged into a Power Source. The App Also Allows for Strobe, Dimming, and On/Off Functions.

Multiple Features: The Bluetooth Relay Control Box is an All Solid State, 6 Channel 2x30 Amp Relay, 12-24 Volt System That is Protected by the Waterproof Aluminum Housing and Installed Under the Hood and Out of Sight. The Control Box Has LED Indicators that Can Tell If a Fuse is Bad or Blown.

Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 1-2 hours
Parts Included
  • Solid State Relay Switch Unit
  • Complete Wiring
  • Back-lit Dash Mount Controller
  • Installation Hardware
  • Installation Instructions
3 Year Warranty
  • Features: Wireless
  • Color: Black
  • Shipping Weight: 6.8lb
  • Shipping Dimensions: 14in x 10in x 5in (L x W x H)
  • Jeep Wrangler 2-Door (JK)

  • 2018 Jeep Wrangler 2-Door (JK)
  • 2017 Jeep Wrangler 2-Door (JK)
  • 2016 Jeep Wrangler 2-Door (JK)
  • 2015 Jeep Wrangler 2-Door (JK)
  • 2014 Jeep Wrangler 2-Door (JK)
  • 2013 Jeep Wrangler 2-Door (JK)
  • 2012 Jeep Wrangler 2-Door (JK)
  • 2011 Jeep Wrangler 2-Door (JK)
  • 2010 Jeep Wrangler 2-Door (JK)
  • 2009 Jeep Wrangler 2-Door (JK)
  • 2008 Jeep Wrangler 2-Door (JK)
  • 2007 Jeep Wrangler 2-Door (JK)
  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2018 Jeep Wrangler Unlimited 4-Door (JK)
  • 2017 Jeep Wrangler Unlimited 4-Door (JK)
  • 2016 Jeep Wrangler Unlimited 4-Door (JK)
  • 2015 Jeep Wrangler Unlimited 4-Door (JK)
  • 2014 Jeep Wrangler Unlimited 4-Door (JK)
  • 2013 Jeep Wrangler Unlimited 4-Door (JK)
  • 2012 Jeep Wrangler Unlimited 4-Door (JK)
  • 2011 Jeep Wrangler Unlimited 4-Door (JK)
  • 2010 Jeep Wrangler Unlimited 4-Door (JK)
  • 2009 Jeep Wrangler Unlimited 4-Door (JK)
  • 2008 Jeep Wrangler Unlimited 4-Door (JK)
  • 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
Review Summary
Based on 2 reviews
Shared Media

Customer Submitted Photos

Trigger Solid State Bluetooth 6 Relay Switching System Reviews