Skip to main content
Home » Jeep Winches, Recovery & Safety Gear » Winches » WARN VR12 Series 12,000lb. Gen II Winch
WARN VR12 Series 12,000lb. Gen II Winch is no longer available
Here are some similar items you might be interested in

WARN VR12 Series 12,000lb. Gen II Winch

Description
The WARN VR12 offer enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack looks great and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. And with a 12,000 lb. capacity, the VR12 is great for three-quarter ton and one-ton pickups and bigger, heavier rigs.
Details
  • 12,000 lb. capacity
  • Black tactical look puts you at the head of the off-road pack
  • Waterproof Albright® contactor control for the ultimate in reliability
  • One-piece tie plate replaces tie rods for added strength and rigidity
  • Convertible control pack allows upright or low-profile winch mounting
  • Durable steel rope
  • Powerful, efficient series-wound motor
  • Best-in-class load-holding cone brake for superior control
  • Designed, engineered, and field tested by Warn engineers in Clackamas, OR
  • Backed by a Limited Lifetime Warranty

VR12 SPECS/PART NUMBERS
Part Numbers: PN 96820 (12V DC)
Rated Line Pull: 12000 lbs. (5443 kgs.) single-line
Motor: 12V DC, Series Wound™
Electrical Controls: Contactor
Remote Control: Remote switch, 12" (3.7m) Lead
Geartrain: 3-Stage Planetary
Gear Ratio: 216.1
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/Length: 2.5"/9.0" (6.73cm/23cm)
Weight (kit shipping): 82.23 lbs. (37.3 kgs.)
Wire Rope: 3/8" x 80' (9.5mm x24.38m)
Fairlead: Cast Iron Hawse
Recommended Battery: 650 CCA for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Powder coat over primer undercoating
Warranty: Limited Lifetime

12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 28.4 (8.6) 65 amps 1/12000(5443)
2000(910) 12.6 (3.8) 144 amps 2/11120(5044)
4000(1810) 9.5 (2.8) 215 amps 3/10340(4690)
6000(2720) 7.5 (2.2) 281 amps 4/9770 (4432)
8000(3630) 5.8 (1.7) 349 amps 5/9250(4196)
10000(4540) 4.4 (1.3) 415 amps
12000(5440) 3.6 (1.3) 457 amps

Above performance specs are based on first layer of drum
Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: 1-2 hours
Parts Included
  • WARN VR12 Winch
  • Hawse Fairlead
  • Wired Remote Control
Warranty
Limited Lifetime Mechanical Warranty & 7 Year Electrical Warranty