Mopar Sunrider Pivot Knuckle for 07-18 Jeep Wrangler JK Unlimited
Popular Similar Items
Details
- Replaces OE (DS): 68003653AA, 68003653AB
- Replaces OE (PS): 68003652AA, 68003652AB
- Construction : Plastic, Metal
- Application : 4-Door Applications Only.
- Locate and See Related Parts :
*Please make a selection above to view weight, dimensions, specs of a specific product
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Mopar Sunrider Pivot Knuckle Options
| Part Number | Catalog # | Price | |||||||
|---|---|---|---|---|---|---|---|---|---|
| 68003653AB | 11132-9122 | Driver Side | $76.56 | ||||||
| 68003652AB | 11132-9121 | Passenger Side | $43.47 |
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Creggory R.
In the photo it looks like the passenger side is labeled as the driver side and vice versa. So my question is will I have to order the one labeled Driver side get the correct one I need which is actually the passenger side?
The part number 68003653AB is for Driver or left hand side. 68003652AB is passenger or right side. Order based on side needed. Not on photo orientation. Thanks for your inquiry.
Tuck L.
I need just the plastic part attached to this knuckle, where the rear window frame latches onto the soft top bow. I have a 4 door jk but the bow and pivot knuckle are one unit, so I can't just purchase the knuckle to replace this plastic part, and don't want to buy completely new bow kits. Do you sell just this plastic part? It is removable, held on by screws. Thanks
That is not serviced alone.
Preston L.
Do you have installation instructions for this item?
No unfortunately factory replacement parts do not have printed installation instructions for distribution, any instruction would be covered in factory service manuals. In the case of this knuckle you remove the old one by removing the set screws and slide this one in place, new set screws are supplied. You are using the screws to tap into the plastic. There will not be a hole already, but the hole in the metal tube will serve as a guide. Make sure that you are satisfied with the position of the knuckle and that is sits in the bracket correctly before you tap the screws.