Skip to main content
Home » Jeep Armor & Protection » Rocker Guards » A to Z Fabrication Rocker Guards with Tube Step Rails in Bare Steel
A to Z Fabrication Rocker Guards with Tube Step Rails in Bare Steel is no longer available
Here are some similar items you might be interested in

A to Z Fabrication Rocker Guards with Tube Step Rails in Bare Steel for 87-95 Jeep Wrangler YJ

Description

Made in the USA.
Rock rails, rock sliders, rockers, ect. - You've heard all the names. Whether you have been on the Rubicon trail, Moab, or in Tellico or Paragon Parks you have likely wished you had some. Now available in Bare Steel for you to customize!
Details

We are now offering what is a good combination of quality, strength and good looks for a reasonable price. Even if your just looking for something to step onto to climb into your Jeep, you can't go wrong with A to Z Fabrication and it's Made in the U.S.A. Quality.

The base pieces are 3/16" thick grade A36 structural steel with a yield strength of 40K PSI and the tube steps are made from 1.5" OD HREW STRUCTURAL round tube with a wall thickness of .120". A to Z Fabrication Rocker Guards cover 6.5" under the rocker panel and 6.25" up the side to cover as much as possible!

There are no modifications necessary to be made to attach these to your Jeep other than drilling the holes for the hardware and the fit is not affected by body lifts.

Ships in Bare Steel

Installation Notes
Installation Difficulty:
Skill Level 3 IconLevel 3Advanced

Drilling Required.

Ships in Bare Steel

Installation Time: 1-3 hours
PDF Logo Install InstructionsInstallation
Instructions
Parts Included

Two Rocker Guards
Stainless Hardware Pack

Warranty
30 Day Limited Warranty

  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
Wranglers with factory flare extention or factory flare steps will have to be removed for installation. The YJ rockers are designed that if you have swapped to TJ flares you will have to cut the rocker base so they fit the way you have the flares installed. The tubes are welded on as not to interfere with flare placement.