Bestop HighRock 4x4 Tailgate Rack Bracket with Universal Rack Tray for 87-06 Jeep Wrangler YJ, TJ & Unlimited
Quadratec Part #:
12034-300
Description
The HighRock 4x4 Cargo Rack System allows a universal tray to be installed in multiple locations around your Jeep, giving you the versatility to put storage where you want it. Depending on where they're installed, trays can each hold up to 75 pounds of gear. The thermoformed plastic tray is lighter than steel and has better impact resistance. Rounded corners help prevent injury if bumped. Cargo is tightly secured with tie-down straps anchored by installed I-bolts.
Details
Racks can hold up to 75 lbs.
Universal Rack Tray measures 43" x 23" x 4"
Installation Notes
Installation Difficulty:
Level 2IntermediateTools Needed:
#2 Phillips Screwdriver
7/16" Wrench
1/2" Wrench
Safety Glasses
Installation Time: Less than an hour
Parts Included
Tailgate Rack Bracket
Universal Rack Tray
Mounting Hardware
Installation Instructions
Warranty
1 Year Limited Warranty. - Features: Steel
- Shipping Weight: 33.6
- Shipping Dimensions: 46in x 24in x 8in (L x W x H)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (LJ)
- 2006 Jeep Wrangler Unlimited (LJ)
- 2005 Jeep Wrangler Unlimited (LJ)
- 2004 Jeep Wrangler Unlimited (LJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Bestop HighRock 4x4 Tailgate Rack Bracket with Universal Rack Tray Reviews
Steve D.
7/28/2018
The install was far more difficult than I expected. I needed to lower the rack to compensate for the sway at higher setting. Additionally, aligning the bolt holes was very tough. It required quite a bit of prying and tapping, meaning this won't be as situational as I'd like - taking it off / putting it on is going to be quite a chore.
