Home » Jeep Bumpers » Front Bumpers » Front Full Width Bumpers » Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper with Q9000 Self Recovery Winch in Black

Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper with Q9000 Self Recovery Winch in Black for 84-01 Jeep Cherokee XJ

Quadratec Part #: 12051.1800
Smittybilt Part #: 1 XJ COMBO
The Smittybilt XRC bumpers for the '84-'01 Jeep Cherokee were engineered to provide maximum clearance for rock crawling. The Q9000 provides all of the capability that most enthusiasts will ever need for occasional use on their Cherokees.

Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper
Raised corners mean better entry and exit under extreme conditions. Bumpers have a one piece welded design made from a two-stage, textured, matte-black powder-coated finish. Each bumper has high-degree approach angles & raised corners for maximum ground clearance. Bumpers are manufactured out of 3/16" cold rolled steel that is robotically welded to exact specifications. The optional front bull bar is manufactured from 1.75" tubing and has two light tabs that can accommodate up to a 9" light. Its unique built-in winch plate design is capable of mounting up to a 15,000 lb winch. Other features are solid mount D-ring welds on the inside and out. D-rings sold separately.

  • Manufactured from 3/16 cold roll steel
  • Optional Bull Bar 1.75" .120 wall over rider
  • Raised corners for better entry and exit under the most extreme conditions
    • Solid Mount D-Rings - Welds on the inside and out!
      • Built in winch plate to accommodate up to 15k winch
        • One-Piece welded design
        • In built Hi-Lift mount points
        • Two Stage Textured Matte

        Black Finish Powder Coat Finish -
        5 year Limited Warranty

        • Smittybilt Advantage Warranty

        Quadratec Q9000 Self Recovery Winch
        Now you can take advantage of Quadratec's massive purchasing power to get the lowest price of any winch in this class. Our engineers work directly with the factory to provide solutions which are specifically tailored to your Jeep®. Our powerful 4.8hp series wound motor and class leading low gear ratios give fast line speed with a Battery Friendly low current draw. You will get the most winching time from your available state of battery charge. We give you an industry best Limited Lifetime Warranty on mechanical parts and a 1 year Warranty on all electrical components. Detailed installation instructions and a handy glove compartment sized Owners Manual with Winching Guide are included.
        All Q Series Winches include two sets of solenoid brackets for side mounting or top mounting.
        Features Included:
        1 Hefty Clutch Control
        2 Case Hardened Input Gears To HRC 30-38*
        3 Case Hardened Intermediate Gears To HRC 43-48*
        4 Case Hardened Output Gears To HRC 43-48*
        5 Stainless Steel Hardware Throughout
        6 Case Hardened Hex Drive Shaft To HRC 38-42*
        7 Load Holding Brake System
        8 Winch Drum is Case Hardened To HRC 55-58*
        9 High Strength Aluminum Tie Bars
        10 Shaft Coupler is Case Hardened To HRC 30-38*
        11 Solid Copper and Brass Power Terminals
        12 Durable Powder Coat Finish
        13 Powerful 4.8 Horsepower Series Wound Motor
        14 Heavy Duty Solenoid with 2 Bracket Locations
        15 Galvanized Aircraft Cable 100' x 3/8"
        16 Stainless Steel Safety Latch
        17 Forged Steel Clevis Hook
        18 Nylon Safety Hook Strap
        19 High Visibility Rubberized Winch Remote with 12' Cord
        20 Solid Copper Battery Cables
        21 Zinc Plated Roller Fairlead
        * Rockwell Hardness.

Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 1-2 hours
Parts Included

Front Bumper
Mounting Hardware
Q9000 Winch
Zinc Plated Roller Fairlead
100' x 3/8" Aircraft Cable
Forged Steel Clevis Hook
Nylon Safety Hook Strap
12' Wire Remote Control
Remote Solenoid Box
Motor Mounted Solenoid Box Mount
Center Mounted Solenoid Box Mounts
Installation Hardware

  • Features: Integrated Winch Mount
  • Color: Black
  • Style: Full Width Bumper
  • Material: Steel
  • Shipping Weight: 219.4lb
  • Jeep Cherokee (XJ)

  • 2001 Jeep Cherokee (XJ)
  • 2000 Jeep Cherokee (XJ)
  • 1999 Jeep Cherokee (XJ)
  • 1998 Jeep Cherokee (XJ)
  • 1997 Jeep Cherokee (XJ)
  • 1996 Jeep Cherokee (XJ)
  • 1995 Jeep Cherokee (XJ)
  • 1994 Jeep Cherokee (XJ)
  • 1993 Jeep Cherokee (XJ)
  • 1992 Jeep Cherokee (XJ)
  • 1991 Jeep Cherokee (XJ)
  • 1990 Jeep Cherokee (XJ)
  • 1989 Jeep Cherokee (XJ)
  • 1988 Jeep Cherokee (XJ)
  • 1987 Jeep Cherokee (XJ)
  • 1986 Jeep Cherokee (XJ)
  • 1985 Jeep Cherokee (XJ)
  • 1984 Jeep Cherokee (XJ)
Share Your Thoughts
Review Summary
Based on 1 reviews
Shared Media

Customer Submitted Photos

Smittybilt XRC Multi Optional Design (M.O.D.) Front Bumper with Q9000 Self Recovery Winch in Black Reviews