- Class III hitch for true towing
- Manufactured from 3/16 cold roll steel
- Raised corners for better entry and exit under the most extreme conditions
- Solid Mount D-Rings - Welds on the inside and out!
- One-Piece welded design
- In built Hi-Lift mount points
- Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty
- Features: Can Holder, Hi-Lift Jack Holder, Integrated Receiver
- Color: Black
- Style: Rear Bumper with Tire Carrier
- Material: Steel
- Shipping Weight: 249.6lb
- Shipping Dimensions: 67in x 15in x 12in (L x W x H)
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Customer Submitted Photos
Smittybilt XRC Rear Bumper with Tire Carrier Reviews
Absolutely nothing wrong with the instructions. I think some people expect hand holding. Total install time was 5 hours, 3 of which was removing the old exhaust bolt strip from the passenger side. What a pain. Rust sucks.
I did have to space the bumper brackets out away from the Jeep body using some washers I had lying around, but having to adjust for manufacturing tolerances is to be expected.
I was able to install just myself, but proper lifting is required. A helper would have been nice, but is not needed.
Fitment good, adjustability good, lined up nicely. Only thing I have concerns about is the latch; it seems a little flimsy and if you don't pay attention to it there's a possibility it could not latch and swing open while driving. Time will tell.
This was pricey, but well worth it.
This bumper has been way more difficult then it should have been, even from the start. When I first ordered the Bumper Quadratec forgot to send me the 2nd box that had the tire carrier in it.
When installing I had major issues with the the bumper brackets, the brackets were warped (from crappy welding?) and the holes did not align up properly causing me to have to file the holes open drastically.
Overall I had to file 8 holes in the brackets to get this bumper to actually go together. I then had to paint the bare metal to protect it so it does not rust out in 3 seconds (Michigan). A lot of extra work for parts that should fit properly right out of the box.
This is not the highest quality bumper out there for sure. Overall, I wish I would have went with the JCR and just paid the extra money for a quality American made product instead of China (Smittybuilt XRC).
This was a pain from the start, and it should have never been so. Next time I order directly from JCR.