Home » Jeep Lift Kits & Suspension » Shackles & Hardware » Shackle Reversal Kits » Mountain Off-Road Standard Shackle Reversal Kit with Weld In Shackle Mount for 87-95 Jeep® Wrangler YJ

Mountain Off-Road Standard Shackle Reversal Kit with Weld In Shackle Mount for 87-95 Jeep® Wrangler YJ

Starting at
The M.O.R.E. Jeep® YJ "through" the frame shackle reversal system is a bolt on and weld in construction with all hardware included. A shackle reversal system or "SRS" allows the front suspension to travel in a much more natural action when the spring compresses. The front pivot brackets are fully welded and powder coated (if applicable). They bolt to the stock shackle mount and lower front bumper mounting holes and additional holes that you must drill in the frame. This S.R.S.™ mounts the shackle "through" the frame. A hole must be drilled in the frame and then a tube welded in it, polyurethane bushings (provided) are then inserted into the tube and the shackles (provided) hang from each side of the frame. This method will not lift the Jeep®. The shackle bolts are greaseable which makes this system superior to others out on the market. The front driveshaft will need to be modified with a long travel slip in stub. It will work with or without a lift kit, spring under or over the axles. Zinc plated shackle plates are only included with the powder coated kits. Stubby Kit versions with more front approach clearance also available.

Why install a shackle reversal system? Because it allows the front suspension to travel in a much more natural action when the spring compresses. In stock form when the front tire comes in contact with an obstruction (shackles in front of the front axle housing), the impact is partially transmitted back to the frame via the solid rear pivot point. Reversing the pivot point to a point in front of the axle, it allows the impact to be better absorbed by the spring and shackle. The result is a more natural suspension flow over the obstacle, thanks to your Jeep shackle reversal system. At higher speeds, a smoother ride and improved handling are noticeable, while less wandering and darting are some of the advantages.

All M.O.R.E. Jeep® shackle reversal systems have a very important design feature built into the new front pivot brackets. They are designed to move the front axle forward from the stock location. When the shackle is reversed to behind the front axle, it will swing rearward and the tire will move slightly aft as the suspension compresses. Pushing the wheelbase forward will help keep the tire from contacting the fender during suspension compression. This is the only correct way to design a shackle reversal system. With this in mind, the front drive shaft will have to have a longer travel slip-yoke installed (in most cases) by a professional drive line shop.

The bracketry on the shackle reversal system is manufactured from .250" thick steel, cut with CNC laser, for .004 of accuracy. All pieces of the Jeep® shackle reversal system are precision bent to exact tolerances and assembled in jigs, and then M.I.G. welded. All hardware is grade 5. Complete instructions with several pictures are included.

Installation Notes
Installation Difficulty:
Level 4Experts Only

1. Drilling Required.
2. Cutting Required.
3. Welding Required.

Installation Time: 5-7 hours
Parts Included

Pivot Bracket-Drivers Side
Pivot Bracket-Pass Side
Tube Spacer 3/4”x2-3/4”
Bolt-Spring Pivot 9/16”X4-1/2”
Bolt-Pivot Bracket to Frame 1/2”x4-1/2”
Bolt-Pivot Bracket to Frame 1/2”x1-1/4”
Nut-Crimp Lock 9/16”
Nut-Crimp Lock 1/2”
Washer-Flat 1/2”
Washer-Flat 9/16”
Shackle Side Plates
YJ Frame Tubes
Bushing Sleeves

  • Features: Shackle
  • Lift Height: 2.00
  • Lift Height Range: 0 - 2.5 inch
  • Location: Front
  • Upper/Lower: Shackle
*Please make a selection above to view specs on a specific product
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
  • 1990 Jeep Wrangler (YJ)
  • 1989 Jeep Wrangler (YJ)
  • 1988 Jeep Wrangler (YJ)
  • 1987 Jeep Wrangler (YJ)
Part NumberCatalog #OptionPrice
8795-312590.0210Black Powdercoat$333.79
8795-3NP12590.0211Bare Steel$322.75
Share Your Thoughts
Review Summary
Shared Media