Wilwood Forged Narrow Superlite 4R Big Brake Kit with Drilled Rotors for 87-89 Jeep® Wrangler YJ with Dana 30 Front Axle
A minimum of a 16 wheel must be used with this kit.
Wilwood Disc Brakes has just released a new disc brake upgrade kit (P/N 140-12576) for the 1987-1989 Jeep Wrangler YJ. This kit offers simple bolt-on installation to the OE brake axle hubs and delivers big brake stopping power and styling for the street, off-road, or show to compliment wheel and tire upgrades on all types of modified/customized Jeeps.
High strength clamping force and positive stopping power is the trademark of the Wilwood net forged narrow Superlite 4 (FNSL4
R) series calipers. Four symmetrical bore stainless steel pistons provide fully balanced pad loading, along with the corrosion resistance and thermal retardant qualities of the stainless alloy that will keep your calipers cooler and running trouble free for many more miles down the road. Base model kits include either sealed gloss black or red powder coat calipers. Wilwoods
new Quick-Silver finish series calipers are also available as an option by special order and additional cost.
FNSL4R upgrade kits can be purchased with 12.19 ULHP or SRP rotors to maximize braking capacity. ULHP rotors are smooth face machined from premium grade carbon iron castings to provide true and precise running for the street. SRP performance rotors feature Wilwoods signature directional drill and slot design with a protective E-coat finish. The drill and slot pattern adds race-tech styling and the venting qualities that preserve pad performance. The heat resistant E-coat finish protects the rotors from rust on all areas that are not swept clean by the brake pads.
Friction is provided by BP-10 compound Wilwood Smart pads. BP-10 is a unique metallic composite formula that provides quiet engagement and low dusting, but with the added temperature range and higher friction values of a semi-metallic compound pad. BP-10 runs clean and quiet on the street, with improved stopping power and fade resistance for tough roads, or no road at all.
To complete the installation, precision machined and application specific brackets come along with premium grade hardware and alignment shims for a secure and accurate installation. DOT approved flexline kits, required to adapt Wilwood calipers to your chassis plumbing, are available separately, order part number 220-12763.
Note: This kit can be utilized on 19902006 Jeep Wrangler YJ and TJ, but it requires a conversion to the 19871989 YJ axle hub.
All of Wilwoods performance brake kits are loaded with cutting edge technology built on decades of domination in world motorsports, and proven reliable through Zero PPM defect supply to OEMs. This kit will not only optimize the braking performance, it will deliver mile after mile of reliable performance and service life on your Jeep, on and off-road.
A minimum of a 16" wheel must be used with this kit.
2 Caliper Mounting Brackets
4 M12-1.75 x 40mm Long, Hex Head Bolts
4 .477 I.D. x .922 O.D. x .063 Thick Washers
4 .015 Thick Shims
12 .033 Thick Shims
2 HP, 1.10 Thk x 12.19 Dia, 8x7.00 Bolt Circle Rotors
2 5x4.50, 1.68 offset, 8 x 7.00 Bolt Circle Hats
16 5/16-18 x .75 Long, Torx Button Head Bolts
2 Rotor Registration Adapters
2 Forged Narrow Superlite 4R Calipers
4 3/8-24 Self-Locking, 12 Point Nuts
4 .391 I.D. x .625 O.D. x .063 Thick Washers
4 3/8-16 x 3/8-24 x 2.50 long Studs (pre installed in bracket)
16 .035 Thick Shims
1 BP-10 Compound, Axle Set Pad
Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
|Part Number||Catalog #||Option||Price|