Warrior Products 2950 Hard Top Quick Release Kit for 07-18 Jeep Wrangler JK & Wrangler Unlimited JK
Quadratec Part #:
13122-1000
Warrior Products Part #:
2950
Description
Replaces the 6 TORX bolts along the tub rail that hold the hardtop onto the Jeep. These quick release knobs allow you to easily prepare your hardtop for removal without tools. Washers are also included to help spread the load of the bolt to reduce the risk of cracking the top from over tightening. Note: Unlimited has an additional 2 bolts underneath the freedom top panels.
Popular Similar Items
Details
Note: Will fit 07-18 even though instructions say 07-09
- Shipping Weight: 1lb
- Shipping Dimensions: 5in x 5in x 5in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Warrior Products Hard Top Quick Release Kit Reviews
Guest
6/18/2022
Fast and no tools required
RICHARD B.
4/15/2022
Quick and easy. Makes everything faster
John B.
8/23/2021
Nice product. Works as advertised. Will definitely make removing much easier. One warning, you may have to adjust your washer/spacers on your hardtop to get these to align at first (the OEM bolts are tampered, as these are not, so less latitude in alignment), a slight tap with a small hammer was all that was needed.
