Made in USA.
Full Protection with a Rugged Look: Looks & Feels Like Carpet. Can be hosed off for easy cleaning. Resistant to most automotive fluids. Fade and UV resistant. The 1/4" thick foam insulates from road noise and heat. 100% waterproof material dries quickly and is mildew, stain, and odor resistant.
Custom Designed for the Jeep: The floor liners are designed to fit perfectly in the Jeep, no cutting or trimming is required. Easy to remove and clean.
3 Year Warranty: Backed by a manufacturer 3 Year Warranty against defects.
- Drivers Footwell
- Passengers Footwell
- Rear Seat Footwell
- Color: Dark Gray
- Material: Carpet
- Location: Front
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Bedrug Premium Carpeted Front Floor Covering Options
|Part Number||Catalog #||Option||Price|
Customer Submitted Photos
Bedrug Premium Carpeted Front Floor Covering Reviews
Very impressed how well these are form fitted. Shipped well. The fitment was consistently 1/2' long everywhere, which allowed a simple tuck to set in place. Even around seat base mounts. Very impressive.
I am only giving this item 3 stars because even though the instructions state that the front seats do not need to be removed, it was WAAAY easier to perform the install after I removed the driver and passenger seats. Install at that point went very well but the carpet required some trimming in a couple of spots. I purchased this product to eliminate the black carpet in my jeep. After the install, I could not tell if there was any noise reduction. If you want to retain your Weathertech mats, just carefully cut them out of the factory carpet and then open the retaining clips up. Place the weathertech mats in to mark the hole for placement and the carefully cut slits into the Bedrug to reinsert. In In the future it would be nice to see lighter color options.
Very good product. A couple helpful tips. The OEM JK carpeting is held on with two threaded nuts near the firewall and one under the seat. They unscrew by hand. When applying the heat shield to the new carpet section remove the backing as you apply otherwise if you take it all off it will roll up. Still usable, but you have to straighten it. Test fit the front sections getting a idea of the proper fitment under the trim and under the seat before applying the tape. Remove back a corner of the adhesive a bit on the velcro so you avoid struggling with it. I did the area near the console section first, then the driver's side, then near the seat. I used a trim tool to push the edges under the trim and under and around the seat rails. The overall fit is very good if you are careful in placing it. Can be removed by pulling up. Looks very nice. The color is a salt and pepper rather than straight black but I have a black mat on top of it. Really happy with this product. Freshened up the interior.