Application of Al's Liner HNR
Al's HNR can be applied with a brush, roller or spray guns including the Al's Texture/Spray Gun, HVLP with 3mm spray nozzle and undercoating guns,(air pressures vary depending on the type of gun you use). For best results apply with the Al's Texture/Spray Gun at 31 mil thickness in order to get the full benefits of HNR.
For the ultimate interior heat reducer and sound deadener or undercoating, apply the recommended base coat of Al's HNR and top coat with Al's Liner, the results will amaze you at a price that can't be beat.
Clean up is simple, wash all application equipment and clean up any overspray or spill areas with soap and water. Please contact your Al's Representative for more information.
- Shipping Weight: 10lb
- Shipping Dimensions: 10in x 8in x 8in (L x W x H)
Customer Submitted Photos
Al's Liners Heat and Noise Reducer Reviews
Worked quite well! I rolled it on the bottom of the tub and noticed less heat and noise after two coats.
Seemed to go on ok but the instructions were lacking and i am not sure i did it right or got it on thick enough. had to use a brush to apply, tried using a roller but the material was so thick that it wouldn't roll on.