This 16 gauge steel full console provides over twice as much secure storage than the factory console. A special bracket is included for mounting a stereo, CB or other electronic equipment inside the lockable console with a hole for the CB Mic. Inside the storage area there is a handy 12 Volt marine grade power outlet and a removable utility tray. Tuffy's 1/4" thick patented Pry-Guard II latching system secures the lid shut while a gas strut supports the lid when open.
For convenience front and rear drink holders are included with anti-rattle drink fingers. The console is taller than the OEM model and features a much needed larger and more comfortable full length padded armrest.
The console is designed to work in vehicles equipped with and without the rear power window switches. Each console includes brackets for both Automatic and Manual transmissions. A divider is also included to gain more storage if the electronics bracket is not used.
Made in the USA.
Here are some similar items you might be interested in
Description
Details
- Electronics mounting bracket, or use included divider bracket for more storage
- Patented Pry-Guard II locking system with a 1/4" steel latch which enables the lid to be latched closed without locking
- Patented Anti-twist push button lock system with a 10 tumbler double bitted security key containing built in weather seals
- Full length marine grade vinyl armrest
- 12V Power outlet inside console, Marine grade
- Over twice as much storage as the factory console (965 cubic inches of storage)
- Weather resistant lid design incorporates an exclusive Pin-Lock hinge security system with built in lid stop
- Hole for CB Mic
- Includes bracket for rear power window switches
- Front and Rear drink holders with anti-rattle drink fingers
- Brackets included for both Automatic & Manual transmissions
- Removable tray
- Gas strut supports lid
- Sturdy Auxiliary switch mounting surfaces
- Grade 8 mounting hardware provided
- Durable texture color match powder coat
Installation Notes
Installation Difficulty:
Level 3AdvancedTools Needed
13MM, 18MM Deep well socket, long extension, and ratchet
T-20, T-30 Torx bit or wrenches
Flat Head & Phillips Screwdrivers
3/8, 5/16",11/32" Nut-drivers/wrenches
Electrical wire cutting, stripping, & crimping tool
Volt meter
Installation Time: 2-4 hours
Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)