JKS Manufacturing JKSOGS151B Rear Adjustable Trackbar & Bracket for 97-06 Jeep Wrangler TJ & Unlimited with 3-6" Lift

The ends of each JKS Adjustable Trackbar feature bushings specifically chosen to provide maximum off-road performance while minimizing the transfer of road noise and vibrations. A Johnny Joint® spherical polyurethane (2.0" or 2.5"), Dura-Thane™ performance polyurethane or OE rubber bushing is used, depending on each application's requirements.
Manufactured from 1.25" x 0.156" DOM tubing, JKS Adjustable Trackbars are bent to OE specifications for proper geometry and clearance. A zinc plating and durable powdercoat finish provide excellent protection from corrosion and trail debris.
The trackbar controls lateral movement of the axle housing...
It is attached to the chassis and axle on opposite sides of the vehicle with flexible mounting points to accommodate suspension travel. Unfortunately, the fixed length of the OE trackbar won't accommodate ride height adjustments. Changing the distance between mounting points forces the axle housing out of alignment with the rest of the vehicle. Unless corrected, this condition will place unnecessary stress on related suspension and steering components, create alignment problems, and prevent proper suspension & swaybar disconnect operation.

Properly aligns axle housing with chassis on coil sprung Jeeps.
Prevents undue stress on related components and centers swaybar for proper disconnect operation.
Ultra-strong, DOM tube construction features OE bends for correct geometry and clearance.
Zinc plated and powder coated for excellent protection from corrosion and debris.
Robust threaded design
enables user to position axle
in 1/16" increments for
extremely precise control.
Bolt-on bracket raises and rotates mounting point on axle end for correct alignment. Fits 97-06 Wrangler TJ Models.

Installation Notes

Installation Difficulty:

Level 2Intermediate

1. Compatible with TJ Rubicon and Unlimited models.
2. Vehicle must be equipped with CV-type rear driveshaft w/double cardan U-joint.
3. Includes required axle bracket (PN OGS160) for CV type driveshaft.

Installation Time: 1-2 hours

Parts Included

Trackbar
Trackbar Bracket
Installation Hardware