Home » Jeep Lift Kits & Suspension » Shocks » Old Man Emu Rear Nitrocharger Shock Absorber
Old Man Emu Rear Nitrocharger Shock Absorber is no longer available
Here are some similar items you might be interested in

Old Man Emu Rear Nitrocharger Shock Absorber for 76-86 Jeep CJ with 0-3" Lift

Whether off-roading or commuting to work, the durable Emu Nitrocharger shock has no match. Ride, handling, and suspension travel are instantly improved with Emu shocks. This means that comfort and safety are increased too. Progressive and responsive, Emu's legendary shock absorbers set new standards in ride comfort over any terrain, and simply outperform the competition. Old Man Emu Nitrocharger shocks are designed, valved and tested by ARB, then manufactured in Australia exclusively for Old Man Emu.
Unique triple lip check valve seal offers excellent gas & oil retention. The eccentric sliding intake valve increases valving response time and reduces operating noise.

The balanced, 35mm Teflon banded rebound piston delivers outstanding valve control resulting in better ride & handling.

The equalised pressure system is delivered through multi-stage valving
    which eliminates oil starvation at high speed and greatly reduces heat and pressure build up. This subsequently produces a more durable shock absorber with improved life expectancy.

    A multi-stage compression valve incorporates a wider range of valve performance resulting in improved vehicle control and ride suppleness.

    When developing a Nitrocharger, we consider both original equipment and OME springs. In many cases, several shock absorber applications are listed for one vehicle to ensure the proper match regardless of spring selection, accessory fitment or load carrying requirements.

    Of course, while Nitrochargers will improve overall performance when fitted with standard springs, the best results are achieved when they're used in conjunction with OME springs.

    Features that make the difference:

  • Tough urethane bushes for extended life
  • Steel stone guard provides maximum protection for the piston rod - where the design allows
  • Super strong 18mm chromed piston rod
  • Low pressure Nitrogen gas for optimum performance
  • Tough twin tube design with super strong 1.6mm thick reserve tube protects vital internal components
  • Supplementary top & bottom welds give added strength and safety
Installation Notes
Installation Difficulty:
Level 2Intermediate
Collapsed 13.4" Extended 21.8" Eye / Eye
Installation Time: Less than an hour
Parts Included

Single Shock

2 Year / 25,000 Mile No-Compromise Warranty.
  • Jeep CJ-7

  • 1986 Jeep CJ-7
  • 1985 Jeep CJ-7
  • 1984 Jeep CJ-7
  • 1983 Jeep CJ-7
  • 1982 Jeep CJ-7
  • 1981 Jeep CJ-7
  • 1980 Jeep CJ-7
  • 1979 Jeep CJ-7
  • 1978 Jeep CJ-7
  • 1977 Jeep CJ-7
  • 1976 Jeep CJ-7
  • Jeep CJ-8

  • 1985 Jeep CJ-8
  • 1984 Jeep CJ-8
  • 1983 Jeep CJ-8
  • 1982 Jeep CJ-8
  • 1981 Jeep CJ-8
  • Jeep CJ-5

  • 1983 Jeep CJ-5
  • 1982 Jeep CJ-5
  • 1981 Jeep CJ-5
  • 1980 Jeep CJ-5
  • 1979 Jeep CJ-5
  • 1978 Jeep CJ-5
  • 1977 Jeep CJ-5
  • 1976 Jeep CJ-5
Also Fits Front 76-81 Jeep CJ 2-3" Lift

Old Man Emu Rear Nitrocharger Shock Absorber Options

Part NumberCatalog #OptionPrice