Teraflex 1853102 Front 2.5-3" Coil Springs for 07-18 Jeep Wrangler JK
Quadratec Part #:
16194-9006
Teraflex Part #:
1853102
Description
The JK Wrangler comes from the factory with a pre-determined amount of front rake (the front end sits lower than the rear about 1.5°). These front coil springs eliminate this factory rake. This means that a lift kit after installation when measured & compared to factory measurements will be lifted more in the front than the rear, to level out the vehicle.
Popular Similar Items
Details
- Provides 2.5" Lift on 4 Door Models
- Provides 3" Lift on 2 Door Models
- Color: Black
- Shocks Included: Without Shocks
- Lift Height Range: 0 - 2.5 inch, 3 - 4.5 inch
- Included Parts: Coil Springs
- Shipping Weight: 20lb
- Shipping Dimensions: 23in x 11in x 5in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Teraflex Front 2.5-3" Coil Springs Reviews
Mitch R.
1/12/2018
Packaging was excellent. Installed in about 40 minutes, I used the instructions only because they list the wrench sizes. You will need to disconnect the sway bar links, shocks, and control arm to get the front axle to drop low enough to get them in and it's way easier if you remove the wheels. Rides great so far and a before and after measurement shows it's a true 2.5" height increase on a 4 door JK.