Rubicon Express 5.5" Extreme-Duty Long Arm Suspension System for 84-01 Jeep Cherokee XJ with Dana 35 Rear Axle
NOTE: When using the stock NP231 or NP242 transfer case, the installation of a slip yoke eliminator and CV driveshaft is recommended. Over 3.5-inches of lift on a full-time NP242 unit may cause unacceptable vibrations on the front driveshaft, when driven in part-time or locked constant use 4WD.
Gen2 Sway Bar Disconnects
Front Coil Spring Front Bump Stop Extensions
Leaf Pack w/Bushings
Rear Brake Hose
Front Brake Lines
Adjustable Track Bar
Track Bar Frame Bracket
Track Bar Frame Bracket Brace
U-Bolt Kit (2421 = Dana 35/44, 1225 = 8.25)
Drop Pitman Arm
Extended Shackle
Front Lower Left Extreme Duty Control Arm w/ Hardware
Front Lower Right Extreme Duty Control Arm
Front Upper Extreme Duty Control Arms w/ Hardware
3- Piece Crossmember (Crossmember, 2-Control Arm Mounts, 2-Side Braces, 2-Bolting Strips, 4-PEM Nut Strips, Transmission Adapter Bracket, Hardware)
Front Sway Bar Relocation Brackets
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
- 1986 Jeep Cherokee (XJ)
- 1985 Jeep Cherokee (XJ)
- 1984 Jeep Cherokee (XJ)
Rubicon Express 5.5" Extreme-Duty Long Arm Suspension System Options
Part Number | Catalog # | Option | Price |
---|