Home » Jeep Engine & Fuel System » Belts & Cables » Pulleys » Hesco HES9199ED Damper/Crank Sensor Kit for 91-03 4.0L 6CYL

Hesco HES9199ED Damper/Crank Sensor Kit for 91-03 4.0L 6CYL

Catalog #: 17009.1000
Hesco Part #: HES9199ED
Damper/Crank sensor kit 1991-03 This kit aids in the installation of a 4.0L engine into an early model Jeep that does not have a provision for the stock sensor. It can also be used when installing a Turbo 400 or 700R4 transmission. This kit re-locates the firing pattern and crank sensor to the front of the engine. This eliminates the problem of drilling the bellhousing and indexing a stock sensor.

his kit will work with all 4.0L engines from 1991-2003. Designed to trigger the ignition from the harmonic balancer instead of the flywheel. Provides a simple alternative to having to replace the bell housing or trying to index a sensor in the stock bell housing.If you are using a factory harness from the donor vehicle your connector may not fit the crank sensor. replace it with crank sensor connector #56016983.

Installation Notes
Installation Difficulty:
Level 3Advanced
Installation Time: 1-2 hours
  • Engine Size: 4.0L I-6
  • Engine Fuel: Gasoline
  • Jeep Wrangler (TJ)

  • 2003 Jeep Wrangler (TJ)
  • 2002 Jeep Wrangler (TJ)
  • 2001 Jeep Wrangler (TJ)
  • 2000 Jeep Wrangler (TJ)
  • 1999 Jeep Wrangler (TJ)
  • 1998 Jeep Wrangler (TJ)
  • 1997 Jeep Wrangler (TJ)
  • Jeep Wrangler (YJ)

  • 1995 Jeep Wrangler (YJ)
  • 1994 Jeep Wrangler (YJ)
  • 1993 Jeep Wrangler (YJ)
  • 1992 Jeep Wrangler (YJ)
  • 1991 Jeep Wrangler (YJ)
Share Your Thoughts
Review Summary
Shared Media