Gibson GP403S Stainless Steel Headers for 07-11 Jeep Wrangler JK
Quadratec Part #:
17666-201
Gibson Part #:
GP403S
Description
Unleash Your Vehicle's Full Power Potential! Every Gibson Header is Dyno-tuned and engineered to deliver more usable horsepower and torque at low and mid-range RPM highway speeds. Improves engine's ability to breathe and cooler operating engine temperature. Designed as a direct replacement for the factory manifolds, using the stock crossover pipe. They are well suited for lowered and raised vehicles, street and off-road. 50 State Street legal. Meets EPA and CARB requirements. Will not affect the factory warranty.
CARB Notice
- 50 State Legal - CARB E.O. Number D-411-8
Popular Similar Items
Details
Stainless Steel- 409L heavy duty 16ga tubing
- Mandrel-bent tubing for optimum airflow and increased Horsepower
- Heavy duty 3/8" thick laser cut port flanges-no warping or leaking
- Bolt on installation- no welding required
- Attaches to the original equipment crossover pipe
- Air injection & oxygen sensor fittings provided
- Premium gaskets and hardware
- OEM style connections
- 50 state street legal
- Color: Silver
- Motor: 3.8L
- Material: 409 Stainless Steel
- Shipping Weight: 15lb
- Shipping Dimensions: 24in x 11in x 10in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Gibson Stainless Steel Headers Reviews
Logan S.
11/21/2017
Was easier than I expected. The instructions recommend removing the inner fender on the passenger side. Instead I removed the battery box which left lots of room to work. The heat shields are attached with hose clamps. I would like to see them use a better system, possibly adding a couple of bolts to the top of the headers to attach shield. The headers have done good job of improving the performance and I would buy them again.
