Rugged Ridge 18006.51 Drop Pitman Arm for 76-86 Jeep CJ with 4" lift and Power Steering
Quadratec Part #:
26029-301
Rugged Ridge Part #:
18006.51
In Cart Price
$119.99
Guaranteed Best Price
$119.99
In Stock
Ships tomorrow if you order within 17 hours 16 min.
Description
Reduce bump steer on lifted vehicles. Dropped pitman arms lower the steering rod to improve the geometry of the linkage. Highly recommended for all suspension lifts of 4".
Details
- Prevents steering bind caused by out of angle steering arms
- A optional part for all lifted Jeeps
- Cast steel design for long life and heavy duty use
- Shipping Weight: 4lb
- Shipping Dimensions: 15in x 9in x 4in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Rugged Ridge Drop Pitman Arm Reviews
William C.
4/8/2020
fit perfect and placed drag link and tie rod parallel, no more steering issues
Questions
James C.
CENTER TO CERTER DISTANCE ?
The term "center to center distance" is not directly applicable to this part. A pitman arm connects the steering box to the drag link and has a specific length and drop to correct steering geometry after a suspension lift.
To find the relevant dimension for this part, you would typically look for the drop amount (which is stated as 4 inches) or the overall length of the arm, measured from the center of the sector shaft bore to the center of the drag link mounting hole.
Unfortunately, the exact eye-to-eye distance or overall length of the OMIX 18006.51 Drop Pitman Arm is not readily available in standard product descriptions.
To find the relevant dimension for this part, you would typically look for the drop amount (which is stated as 4 inches) or the overall length of the arm, measured from the center of the sector shaft bore to the center of the drag link mounting hole.
Unfortunately, the exact eye-to-eye distance or overall length of the OMIX 18006.51 Drop Pitman Arm is not readily available in standard product descriptions.