Ten Factory MG22145 Front 27 Spline (Disconnect Eliminator) Chromoly Axle Kit for 87-95 Jeep Wrangler YJ and 84-92 Cherokee XJ with Dana 30 Axle
Performance Axle Specifications:
- Dana 30 with 27 Spline inner and 27 Spline outer
- Left Axle Length – 16.50” / Right Axle Length – 32.31” / Axle Stub - 6.11”
- Heat Treated 4340 Chromoly Material for High Strength and Resiliency
- Torque Equalizing Diameters helps eliminate u-joint failure
- Axle Model: Dana 30
- Axle Position: Front
- Features: Chromoly
- Shipping Weight: 31lb
- Shipping Dimensions: 45in x 9in x 5in (L x W x H)
Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
Jeep Wagoneer (XJ)
- 1991 Jeep Wagoneer (XJ)
- 1990 Jeep Wagoneer (XJ)
- 1989 Jeep Wagoneer (XJ)
- 1988 Jeep Wagoneer (XJ)
- 1987 Jeep Wagoneer (XJ)
- 1986 Jeep Wagoneer (XJ)
- 1985 Jeep Wagoneer (XJ)
- 1984 Jeep Wagoneer (XJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Ten Factory Front 27 Spline (Disconnect Eliminator) Chromoly Axle Kit Reviews
Came in perfect. all put together and packaged very well. would be nice if the sent 2 axle shaft seals and shorter bolts for the cover, stock bolts are to long.
Awsome kit!!! It was a neat suprise that it come with a block off plate and seal! Perfect fit in my 1994 YJ with disconnect delete!
Great price and product, only complaint I have so far was that one of the snap rings was not installed so I had to pick up some snap ring pliers. Really annoyed me at the time but they are much beefier than my old ones. I installed it on my 89 cherokee. Had to remove some bearings that were on the diff side of the disconnect since they wouldn't fit through, if you get something like a pipe and hit it inwards you can pop it out and take it out through the differential. So don't put in the seal until after you get it out. Maybe a good idea to replace your hub while your in there.
