Ten Factory MG22152 Front 27 Spline Chromoly Axle Kit for 07-18 Jeep Wrangler JK with Dana 30 Front Axle
Performance Axle Specifications:
- Dana 30 with 27 Spline inner and 32 Spline outer
- Left Axle Length – 18.75” / Right Axle Length – 34.45” / Axle Stub - 6.25”
- Heat Treated 4340 Chromoly Material for High Strength and Resiliency
- Torque Equalizing Diameters helps eliminate u-joint failure
- Axle Model: Dana 30
- Axle Position: Front
- Features: Chromoly
- Shipping Weight: 34lb
- Shipping Dimensions: 45in x 9in x 5in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Ten Factory Front 27 Spline Chromoly Axle Kit Reviews
Arrived as promised and undamaged. Installation went smoothly. Everything hooked up and fit as it should. My 2008 JKU Dana 30 had 35mm axle nuts. Can't beat the price. We will see how long they last. I installed ten factory front axle tube seals as well. Passenger side was more difficult to get the axle past the tube seal than the drivers side was.
In my opinion the best bang for the buck on chrome moly axle upgrade for a set. Install was a breeze just make sure you have a 36mm socket to remove the axle nuts.
Good value