Crown Automotive 4882714 Rear Slip Yoke for 96-01 Jeep Cherokee XJ & 97-06 Wrangler TJ & Unlimited with Model NP231 Transfer Case & 96-00 Grand Cherokee ZJ & WJ with NP242 Transfer Case
Quadratec Part #:
52239-0004
Crown Automotive Part #:
4882714
Description
If you pulled your rear drive shaft out on your last wheeling trip from too much flexing , or you broke an eye on your yoke, the Crown Automotive Rear Slip Yoke will have you fixed up in a hurry. For Jeeps from 1996-2006 with an NP231 or NP242 transfer case, this yoke replaces the original yoke that connects to the rear drive shaft. In extreme cases, when the length of the drive shaft is too short, you can pull the yoke from the housing and your drive shaft drops. Chances are pretty good that during the fall the yoke will be damaged. Replace it with a new yoke to assure that the surfaces are smooth and true and will not cut up the seals.
Popular Similar Items
Details
Original Replacement: Direct fit for NP231 and 242 transfer cases that are still stock and do not have a Slip Yoke Eliminator installed for vehicles with a suspension lift.
Stock Drive Shafts: Accepts u-joint from stock sized 1310 driveshafts
2.5" of slip
6" from center of u-joint to end
26 Splines
Uses a Spicer 1310 Series (3.219" O.D.) Universal Joint
- Transfer Case Model: NP231, NP242
- Shipping Weight: 2.44lb
- Shipping Dimensions: 8in x 4in x 3in (L x W x H)
Jeep Cherokee (XJ)
- 2001 Jeep Cherokee (XJ)
- 2000 Jeep Cherokee (XJ)
- 1999 Jeep Cherokee (XJ)
- 1998 Jeep Cherokee (XJ)
- 1997 Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
Jeep Grand Cherokee (WJ)
- 2000 Jeep Grand Cherokee (WJ)
- 1999 Jeep Grand Cherokee (WJ)
Jeep Grand Cherokee (ZJ)
- 1998 Jeep Grand Cherokee (ZJ)
- 1997 Jeep Grand Cherokee (ZJ)
- 1996 Jeep Grand Cherokee (ZJ)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (LJ)
- 2006 Jeep Wrangler Unlimited (LJ)
- 2005 Jeep Wrangler Unlimited (LJ)
- 2004 Jeep Wrangler Unlimited (LJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Richard M.
I want to make sure this will fit a 2003 Wrangler X, 6 cyl, 5 speed manual. No lift kit or anything
Yes, it will. This is a stock replacement for your transfer case. The Rubicon would be the only model NOT able to use this yoke.
Barbara R L.
I want to put a 4" life on my 97 TJ will this make my stock drive line work ?
This is a replacement for a damaged yoke on vehicles that do not have an SYE. If your are putting a 4" lift on a TJ then you will need a kit that eliminates this yoke and changes the drive shaft.
