Tom Woods 53004369 Front Drive Shaft for 87-95 Jeep Wrangler YJ
Quadratec Part #:
52300-06
Tom Woods Part #:
53004369
Description
38.00" Collapsed Length.
Fits the Following Applications:
Fits the Following Applications:
- 87-95 Wrangler YJ with 2.5L Engine
- 87-95 Wrangler YJ with 4.0L or 4.2L Engine & Automatic Transmission
Popular Similar Items
Details
- Engine: 2.5L, 4.0L, 4.2L
- Transmission: Automatic
- Location: Front
- Shipping Weight: 18lb
- Shipping Dimensions: 46in x 5in x 5in (L x W x H)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Tom Woods Front Drive Shaft Reviews
McBride M.
10/24/2021
Very happy. My driveshaft had started to show its age earlier this year, but I guess it had been worn out for a while, because this shaft has my Jeep driving better than it has in almost a decade. It's balanced to speeds faster than the Jeep will go, it's beefy, and a great price.
Joe C.
1/27/2019
Put this in my 1992 Jeep Yj 2.5L , has beefy U-joints and has a nice finish fit perfect with my 4 inch lift kit
MATTHEW W.
12/4/2017
Easy install, much better than the stock driveline. Great value for the price.
Questions
Jered Y.
Is it balanced? I'm going to be converting to a one piece axle.
Yes, the Tom Woods 53004369 Front Drive Shaft is professionally balanced before it leaves their facility.
Dennis C.
is this stock length? Im lookin to do a shackle reversal kit and from what i have heard is that i will need a 6-8 inch longer drive shaft. if this doesn't work do you have one that will fit my application?
Yes, it is stock in length. For rear drive shaft, it is important to take measurements after the lift is installed. https://4xshaft.com/blogs/general-tech-info-articles/driveshaft-length-after-lift. Thanks for your inquiry.
DAVID M.
1. What is the outside diameter of the shaft?
2. Will it fit 39-1/2 inch t-case to front diff?
This driveshaft is 2" diameter 0.120" wall USA made DOM tube. The compressed length is 38" and extended length is 41". Thank you for the question.
