Crown Automotive 5013626AA Drive Shaft Small Boot Clamp for 97-18 Jeep Wrangler TJ & JK 2 Door
Quadratec Part #:
52300-0904
Crown Automotive Part #:
5013626AA
Description
Fits the following applications:
- 97-06 Wrangler TJ, front drive shaft
- 07-17 Wrangler JK 2-Door
Popular Similar Items
Details
- Location: Front, Rear
- Shipping Weight: 1lb
- Shipping Dimensions: 2in x 2in x 1in (L x W x H)
Jeep Liberty (KJ)
- 2007 Jeep Liberty (KJ)
- 2006 Jeep Liberty (KJ)
- 2005 Jeep Liberty (KJ)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
For 2WD Liberty KJ
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Andy C.
Is this the correct size clamp for both sides of the rear driveshaft boot, connected to the NP231 transfer case slip yoke?
The Crown Automotive 5013626AA Drive Shaft Small Boot Clamp is described as having an inside diameter of 1.560 inches.
While this clamp might physically fit on both the transfer case (NP231) and the rear driveshaft boot, it is specifically listed as the "small" clamp. Driveshaft boots near the slip yoke often use two different sized clamps to create a proper seal due to the varying diameters of the boot ends.
It is highly unlikely that the Crown Automotive 5013626AA is the correct size for both sides of the rear driveshaft boot connected to the NP231 transfer case slip yoke.
While this clamp might physically fit on both the transfer case (NP231) and the rear driveshaft boot, it is specifically listed as the "small" clamp. Driveshaft boots near the slip yoke often use two different sized clamps to create a proper seal due to the varying diameters of the boot ends.
It is highly unlikely that the Crown Automotive 5013626AA is the correct size for both sides of the rear driveshaft boot connected to the NP231 transfer case slip yoke.