Tom Woods 52301.905 Extended Rear CV Driveshaft for 97-06 Jeep Wrangler TJ with Dana 44 Rear Axle
Quadratec Part #:
52301-905
Tom Woods Part #:
52301.905
Description
Extended rear drive shafts for lifted applications. Manufactured with top-quality components and workmanship. Balanced and ready to install. For use only with slip-yoke eliminator kit.
For vehicles with 5-speed or 6-speed and Dana 44.
NOT for Rubicon Edition.
For vehicles with 5-speed or 6-speed and Dana 44.
NOT for Rubicon Edition.
Popular Similar Items
Details
Specifications:
- Length: 15"
- Running Position: 14"-16"
- Requires SYE for fitment
- NOT compatible with the Rubicon Model
- Location: Rear
- Shipping Weight: 17lb
- Shipping Dimensions: 21in x 13in x 7in (L x W x H)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
- 1998 Jeep Wrangler (TJ)
- 1997 Jeep Wrangler (TJ)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Tom Woods Extended Rear CV Driveshaft Reviews
Dylan M.
2/2/2026
Tom Woods shafts are consistently top notch.
Wade R.
2/18/2023
Great upgrade no vibration when climbing
Ed J.
11/8/2021
Came recommended.
Questions
Edward H.
what is the extended and collapsed length of this drive shaft
This drive shaft will bottom out at 14.25” and extend out to 17” center of u-joint to center of u-joint, safe usable range is 15” to 16” Thanks for your inquiry.
Jason M.
Does this have the X-spline? When speaking to Shawn Woods he told me that anything under 16.5 inch needed to use the S-spline.
That part will use the ( S ) standard spline its natural ride length is 15.5”. Thanks for your inquiry.
Kenneth S.
Will this work on a stock suspension with a SYE installed?
No unfortunately these Tom Woods shafts require a lift ( 2"-6" ) and SYE for proper fitment on the TJ Wrangler