Crown Automotive RT23007 AMC 20 One Piece Axle Shaft Kit for 76-83 Jeep CJ-5 & 76-81 CJ-7
Not compatible with Quadra-Trac Applications.
Level 3Advanced- Stamped Side of Bearing Faces Differential (R&P Side)
- Not compatible with Quadra-Trac.
2 Axle Shafts
2 Inner Oil Seals
2 Outer Oil Seals
2 Wheel Bearings
10 Wheel Studs
- Axle Model: AMC 20
- Axle Position: Rear
- Features: One Piece
- Shipping Weight: 34lb
- Shipping Dimensions: 33in x 8in x 8in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive AMC 20 One Piece Axle Shaft Kit Reviews
These fit and function as described. Install instructions are pretty good, but the job is not for a novice. Pressing the axle bearings into place with the brake backing plates axle seals, and dust covers in place is difficult. As insurance against clearance issues, I opened the differential case and removed the OEM bearing preload spacer that rides on the differential cross shaft, so there is no possibility that the new axles will press against each other and dislodge a pressed on axle bearing. Unless you really need the additional strength of a one-piece axle, I’d recommend going with the OEM two-piece axle/hub combo. Properly installed and maintained, the two-piece units are more than adequate for all but the most severe duty, and are much easier to install.
