Crown Automotive 5453958KM Wiper Linkage Master Kit for 76-86 Jeep CJ Series
Out of Stock
These similar parts are in stock now
Original Replacements: Crown offers replacement parts guaranteed to fit and function like the original. No modifications needed to existing motor or windshield frame.
Replace and Upgrade: Not only does this kit replace your entire wiper linkage system with fresh parts, the wiper blades that are included are a contemporary design that lasts longer in the elements.
Chrome Plated: Steel wiper arms are chrome plated for a bright, fresh look like it came from the showroom floor.
- Features: Metal, Rubber
- Color: Chrome
- Shipping Weight: 10lb
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
- 1976 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
- 1976 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Wiper Linkage Master Kit Reviews
Works great. Instructions would have helped, though.
Everything worked GREAT! FYI gasket go to the outside. No instructions.
The bushings were loose and the long arm pivot broke on my way to work a week after install. I'll be calling for a return. The good news is everything fit and functioned perfectly until failure.
Questions
Bayonet Style Arm: Many classic CJ replacement arms use a bayonet tip. Slide the flat, needle-like tip of the wiper arm straight into the matching slot on top of the wiper blade connector until the locking tab or spring clip snaps securely into place over the ridge or hole on the bayonet arm.
Hook Style Arm (J-Hook): If your arm has a small curved hook at the end, rotate the wiper blade perpendicular to the arm, slip the hook through the opening in the blade's center bridge, and snap the blade down so the curved section seats securely inside the locking channel.
Securing: Give the blade a gentle tug outward once connected to ensure the locking clip has fully engaged and will not slip off under the tension of the spring-loaded arm.