Crown Automotive A614 Rear Leaf Spring for 41-68 Jeep CJ-2A, CJ-3A & CJ-3B and MB
Restores Original Suspension Function: Precisely engineered to match the specifications of classic Jeeps, enhancing suspension performance and comfort.
High-Quality Steel Construction: Made from durable steel to withstand the rigors of both off-road and on-road use.
Enhanced Load Capacity: Improves the vehicle's ability to carry heavier loads without sagging, perfect for both everyday use and off-road adventures.
Direct Replacement: Designed to be a direct replacement, ensuring easy installation without the need for modifications.
Compatibility: Fits Jeep models from 1941 to 1968, including CJ-2A, CJ-3A, CJ-3B, and MB, ensuring wide applicability.
Maximize your workshop's potential with the Crown Automotive A614 Rear Leaf Spring for 41-68 Jeep CJ-2A, CJ-3A & CJ-3B and MB models. Designed for resilience and flexibility, this rear leaf spring is crucial for maintaining the suspension's effectiveness and ride quality in classic Jeep editions. Its robust construction ensures reliable performance across varied terrains, restoring the original ride height and improving load-carrying capabilities. Suitable for both restoration enthusiasts and routine maintenance, it's the perfect choice for extending the life and functionality of your vintage Jeep.
Leaf Count : 9
Measures (eye to eye) : 42"
Accompanying Hardware : Bushings Included
Required Hardware : Greasable Pivot Bolt #J0384228
- Color: Black
- Shocks Included: Without Shocks
- Lift Height Range: 0 - 2.5 inch
- Included Parts: Leaf Springs
- Shipping Weight: 22lb
- Shipping Dimensions: 42in x 8in x 3in (L x W x H)
Jeep CJ-2A
- 1949 Jeep CJ-2A
- 1948 Jeep CJ-2A
- 1947 Jeep CJ-2A
- 1946 Jeep CJ-2A
- 1945 Jeep CJ-2A
Jeep CJ-3A
- 1953 Jeep CJ-3A
- 1952 Jeep CJ-3A
- 1951 Jeep CJ-3A
- 1950 Jeep CJ-3A
- 1949 Jeep CJ-3A
- 1948 Jeep CJ-3A
Jeep CJ-3B
- 1968 Jeep CJ-3B
- 1967 Jeep CJ-3B
- 1966 Jeep CJ-3B
- 1965 Jeep CJ-3B
- 1964 Jeep CJ-3B
- 1963 Jeep CJ-3B
- 1962 Jeep CJ-3B
- 1961 Jeep CJ-3B
- 1960 Jeep CJ-3B
- 1959 Jeep CJ-3B
- 1958 Jeep CJ-3B
- 1957 Jeep CJ-3B
- 1956 Jeep CJ-3B
- 1955 Jeep CJ-3B
- 1954 Jeep CJ-3B
- 1953 Jeep CJ-3B
Jeep MB
- 1945 Jeep MB
- 1944 Jeep MB
- 1943 Jeep MB
- 1942 Jeep MB
- 1941 Jeep MB
Willys MB
- 1945 Willys MB
- 1944 Willys MB
- 1943 Willys MB
- 1942 Willys MB
- 1941 Willys MB
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Key Differences
The Crown A614: This is a stock-height (0" lift) OEM-style replacement spring. It is designed to match original factory specifications, which typically results in a shorter, flatter profile than what you are currently running.
Your Current Setup: The Rancho RS44120 is a lift-specific leaf spring that provides 2.5 inches of lift and measures approximately 42.5 inches eye-to-eye.
Compatibility: If you install the Crown A614 springs, your Jeep will sit significantly lower in the rear, likely causing issues with your current shock absorbers and driveline angles, and it will not provide the "lifted" look and travel you currently have.
Why your measurements differ
The factory eye-to-eye length for a standard CJ-3B rear leaf spring is typically around 40–44 inches depending on the specific application and mounting, but your measured 39.5 inches (with 2.5" of lift) suggests that your suspension geometry has been altered by the lift springs and potentially the shackle setup.
Recommendation
Since you have a lifted vehicle with Rancho springs, do not replace them with the stock Crown A614 units. You should look for springs specifically marketed as "2.5-inch lift" springs for your vehicle.
