Crown Automotive 52037568 Power Steering Pump for 77-86 Jeep CJ Series
Quadratec Part #:
56111-00
Crown Automotive Part #:
52037568
Description
If you hear grinding when you turn your Jeep and you seem to be pulling harder to make turns, you may want to check your steering fluid and pump. The Crown Automotive Power Steering Pump is a direct replacement for the CJ's mechanical pump installed at the factory. Driven by a pulley and belt (engine specific, not included), the simple design can still go bad over time. Seals and bearings can go bad allowing fluid to leak out and allowing the internal impeller to move erratically, which in turn reduces the pumps effectiveness. Replace the pump and get your Jeeps full range of steering back.
Details
Easy Installation: This drop in unit performs exactly like the original and mounts with the same hardware so you do not have to modify anything to finish the project.
Original Replacement: Maintains the power that is required to move the factory steering box for proper turning radius.
Pump and Reservoir: Complete unit, Fits 4, 6 and 8-Cylinder Engines and requires proper drive pulley (engine specific)
- Engine Size: 2.5L I-4, 4.2L 258ci I-6, 5.0L AMC 304ci V-8
- Shipping Weight: 10lb
- Shipping Dimensions: 11in x 8in x 7in (L x W x H)
Jeep CJ-5
- 1983 Jeep CJ-5
- 1982 Jeep CJ-5
- 1981 Jeep CJ-5
- 1980 Jeep CJ-5
- 1979 Jeep CJ-5
- 1978 Jeep CJ-5
- 1977 Jeep CJ-5
Jeep CJ-7
- 1986 Jeep CJ-7
- 1985 Jeep CJ-7
- 1984 Jeep CJ-7
- 1983 Jeep CJ-7
- 1982 Jeep CJ-7
- 1981 Jeep CJ-7
- 1980 Jeep CJ-7
- 1979 Jeep CJ-7
- 1978 Jeep CJ-7
- 1977 Jeep CJ-7
Jeep CJ-8
- 1985 Jeep CJ-8
- 1984 Jeep CJ-8
- 1983 Jeep CJ-8
- 1982 Jeep CJ-8
- 1981 Jeep CJ-8
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
