OMIX 18045.02 Left Hand Thread Tie Rod End for 45-71 Jeep Vehicles with 4 Cylinder Engine
Quadratec Part #:
918045-02
OMIX Part #:
18045.02
Popular Similar Items
Details
- Features: Metal, Rubber
- Shipping Weight: 2lb
- Shipping Dimensions: 9in x 3in x 3in (L x W x H)
Jeep M-38A1
- 1963 Jeep M-38A1
- 1962 Jeep M-38A1
- 1961 Jeep M-38A1
- 1960 Jeep M-38A1
- 1959 Jeep M-38A1
- 1958 Jeep M-38A1
- 1957 Jeep M-38A1
- 1956 Jeep M-38A1
- 1955 Jeep M-38A1
- 1954 Jeep M-38A1
- 1953 Jeep M-38A1
- 1952 Jeep M-38A1
Jeep CJ-3B
- 1968 Jeep CJ-3B
- 1967 Jeep CJ-3B
- 1966 Jeep CJ-3B
- 1965 Jeep CJ-3B
- 1964 Jeep CJ-3B
- 1963 Jeep CJ-3B
- 1962 Jeep CJ-3B
- 1961 Jeep CJ-3B
- 1960 Jeep CJ-3B
- 1959 Jeep CJ-3B
- 1958 Jeep CJ-3B
- 1957 Jeep CJ-3B
- 1956 Jeep CJ-3B
- 1955 Jeep CJ-3B
- 1954 Jeep CJ-3B
- 1953 Jeep CJ-3B
Jeep CJ-3A
- 1953 Jeep CJ-3A
- 1952 Jeep CJ-3A
- 1951 Jeep CJ-3A
- 1950 Jeep CJ-3A
- 1949 Jeep CJ-3A
- 1948 Jeep CJ-3A
Jeep CJ-2A
- 1949 Jeep CJ-2A
- 1948 Jeep CJ-2A
- 1947 Jeep CJ-2A
- 1946 Jeep CJ-2A
- 1945 Jeep CJ-2A
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Todd W.
Looking for the diameter and thread pitch.
Diameter: 11/16 inch (approximately 17.46 mm)
Thread Pitch: This information is not explicitly provided. Standard thread pitch for an 11/16" NF (National Fine) thread is 16 threads per inch, and for 11/16" UNC (Unified National Coarse) it is 14 threads per inch. Without further specification, it's hard to know the exact pitch. However, given it's an automotive steering component, it's likely a standard thread.
Thread Pitch: This information is not explicitly provided. Standard thread pitch for an 11/16" NF (National Fine) thread is 16 threads per inch, and for 11/16" UNC (Unified National Coarse) it is 14 threads per inch. Without further specification, it's hard to know the exact pitch. However, given it's an automotive steering component, it's likely a standard thread.