Skip to main content
Home » Jeep Winches, Recovery & Safety Gear » Fairleads & Rollers » Hawse Fairleads » Factor 55 Hawse Fairlead 1.5

Factor 55 00019 Hawse Fairlead 1.5

Quadratec Part #: 92135-9081
Factor 55 Part #: 00019
Description
Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick. The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry's first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles. The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner champ fer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a machined logo.For synthetic winch rope only.

Made in USA
Details

WARNING!
Always confirm that the synthetic rope cannot make contact to any sharp edges like the opening in the steel fairlead mounting plate or bumper opening. In some cases it may be required to grind this slot larger. Always sand and deburr this opening after any grinding operation.

Installation Notes
Installation Difficulty:
Skill Level 2 IconLevel 2Intermediate
Installation Time: Less than an hour
Parts Included

Fairlead

Warranty
1 Year Limited Warranty.
  • Features: Aluminum
  • Shipping Weight: 4lb
  • Shipping Dimensions: 15in x 4in x 2in (L x W x H)
Share Your Thoughts
Review Summary
5
Based on 5 reviews
Shared Media
Questions

Customer Submitted Photos

Factor 55 Hawse Fairlead 1.5 Reviews

Questions