Constant improvement for over 90 years has made this jack an off-roading staple. We are proud to offer the all-high tensile 48" cast jack. This jack puts you in command of lifting, pushing, pulling and winching, and has a capacity of up to 3.5 tons! It weighs approximately 30 lbs. and is easy to use. Too many uses to list.
Customer Submitted Photos
Hi-Lift Jack All-Cast Iron 48" Red Jack Reviews
Gets the job done. The paint will wear off after the 1st couple of uses.
Learn how to use this tool properly. If you do, this tool will work flawlessly and safely; and you’ll be really glad you bought one!
The only issues with this are that the baseplate is fairly loose and rattles around quite a lot when driving around, I zip tied mine down a bit to keep it a little bit less noisy and it seems to have worked okay. Another issue is that the inside of the handle is starting to rust a bit from water getting into it and sitting there, some drain holes might have helped with that a lot. The last issue is with the pin holding the baseplate onto the jack itself. It seems to be just barely long enough to hold the plate in place and doesnt stick through and expand out like a typical pin should, I dont know if that is by design or not, just something my structural engineer father and I thought was a bit off.